Total 72 Senior Executive communications engineer job vacancies in Malaysia

Job Responsibilities:

• Collaborate with cross-functional teams to integrate quality controls into every phase of the production process.
• Interpret customer standards, identify whether customer standards are complete, simultaneously evaluate testing equipment solutions, submit production requests, and follow up on progress.
• Ensure products comply with industry standards, regulations, and customer requirements.
• Stay informed about relevant quality standards and regulatory requirements.
• Conduct inspections and quality tests to identify defects or deviations from quality standards.
• Investigate and analyze root causes of defects or quality issues.
• Implement corrective and preventive actions to address identified problems and prevent recurrence.
• Identify opportunities for process improvement to enhance overall product quality and efficiency.
• Implement continuous improvement initiatives based on data analysis and feedback.
• Collect and analyze customer feedback related to product quality.
• Address customer complaints and work towards continuous improvement based on customer input.

• Collaborating with suppliers to develop and implement quality assurance processes, performing audits, resolving quality issues, and driving continuous improvement initiatives.
• As the primary liaison between the company and its suppliers on quality matters.
• Participate in supplier evaluations within the procurement resource pool and new supplier areas to produce evaluation reports.
• Conduct audits of existing and new suppliers based on procurement resource requirement, follow up to ensure issues identified in the audits are resolved.
• Identify and convert quality information according to the requirements of new projects and ensure effectiveness communication of the information.
• Participate in the development of supplier audit content and plans and ensure the implementation of supplier audit content.
• Conduct periodic on-site audits of suppliers based on their corrective actions to ensure the effectiveness of the actions.

Work Experience Requirements:

• Familiarity with and understanding of quality management systems, such as ISO 9001.
• Proficiency in statistical analysis and the use of quality tools such as Statistical Process Control (SPC), and other quality improvement methodologies.
• Excellent interpersonal and communication skills and high level of computer literacy.

Education Requirements:

• Diploma, degree or equivalent preferred; or more than 3 years of Quality related experience or related training; or equivalent combination of education and experience.

Language(s) Requirements:

• Mandarin, English and Bahasa Malaysia.

Benefits:

• Annual Leave, Sick Leave, Maternity Leave, Paternity Leave, Compassionate Leave.
• Meal allowance, Phone allowance, Attendance allowance, Medical Claim Reimbursement.
• Birthday Gift, Festival Celebration Gift.
• Professional Career Development (training programs, workshop, conferences to enhance skills).
• OT claim based on company policy.

Job Responsibilities:

• Collaborate with cross-functional teams to integrate quality controls into every phase of the production process.
• Interpret customer standards, identify whether customer standards are complete, simultaneously evaluate testing equipment solutions, submit production requests, and follow up on progress.
• Ensure products comply with industry standards, regulations, and customer requirements.
• Stay informed about relevant quality standards and regulatory requirements.
• Conduct inspections and quality tests to identify defects or deviations from quality standards.
• Investigate and analyze root causes of defects or quality issues.
• Implement corrective and preventive actions to address identified problems and prevent recurrence.
• Identify opportunities for process improvement to enhance overall product quality and efficiency.
• Implement continuous improvement initiatives based on data analysis and feedback.
• Collect and analyze customer feedback related to product quality.
• Address customer complaints and work towards continuous improvement based on customer input.

• Collaborating with suppliers to develop and implement quality assurance processes, performing audits, resolving quality issues, and driving continuous improvement initiatives.
• As the primary liaison between the company and its suppliers on quality matters.
• Participate in supplier evaluations within the procurement resource pool and new supplier areas to produce evaluation reports.
• Conduct audits of existing and new suppliers based on procurement resource requirement, follow up to ensure issues identified in the audits are resolved.
• Identify and convert quality information according to the requirements of new projects and ensure effectiveness communication of the information.
• Participate in the development of supplier audit content and plans and ensure the implementation of supplier audit content.
• Conduct periodic on-site audits of suppliers based on their corrective actions to ensure the effectiveness of the actions.

Work Experience Requirements:

• Familiarity with and understanding of quality management systems, such as ISO 9001.
• Proficiency in statistical analysis and the use of quality tools such as Statistical Process Control (SPC), and other quality improvement methodologies.
• Excellent interpersonal and communication skills and high level of computer literacy.

Education Requirements:

• Diploma, degree or equivalent preferred; or more than 3 years of Quality related experience or related training; or equivalent combination of education and experience.

Language(s) Requirements:

• Mandarin, English and Bahasa Malaysia.

Benefits:

• Annual Leave, Sick Leave, Maternity Leave, Paternity Leave, Compassionate Leave.
• Meal allowance, Phone allowance, Attendance allowance, Medical Claim Reimbursement.
• Birthday Gift, Festival Celebration Gift.
• Professional Career Development (training programs, workshop, conferences to enhance skills).
• OT claim based on company policy.

Job Description

• Manage master schedules, project time lines and milestones; ensure planning of equipment tools, machinery, people resources (including contractors & subcontractors) are organized to meet project timing
• Work directly with project team member & subcontractor to achieve completion of the project on schedule, within budget & with quality workmanship that conforms to clients expectation & requirements
• Coordinate with other related internal departments to ensure goods are supplied on time & tracking status
• Provide weekly updates for all current and prospective projects to management
• Manage project during preconstruction process till project completion including billing & collection; pre-award activities include site surveys, feasibility reviews, subcontractor selection, coordination & submission of related documents to clients, ensure all work permits / requirements & project scope is confirmed with customer
• Responsible for tendering of projects, costing, quotations and meeting prospective clients
• Overall liaison person with product principals and customers

Job Requirements:

• Degree in Mechanical / Electrical Engineering or related discipline
• No less than 2-3 years working experience in related field (previous experience with loading dock equipment and material handling is beneficial)
• Good written and verbal communication and presentation skills, fluent in English, Bahasa and Mandarin/Chinese dialect
• Good communication skills, able to interact from plant operator, dock workers up to board room presentation
• Strong leadership skills, capable of planning, good organization skills, coordinating duties among members of workforce
• Possess good interpersonal skills; able to work independently and in a team
• Self-motivated, quick learner, positive attitude and able to work under tight schedule to meet deadlines
• Good selling, negotiation skills and sales result-oriented
• Able to multi-task and attention to details
• Possess own transport & willing to travel

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Free snacks / Happy hours
• Regular team activities
• Medical insurance
• Personal leave
• Open culture
• Personal development opportunities
• Fitness membership
• Dental insurance
• Vision insurance
• Paid training and development

Job Description:

• Perform supervisory work; site standing supervision, inspection and monitor work progress at site.
• To plan, coordinate work and make sure site work carry out accordingly to drawing, contract specification, schedule, construction plan, procedures and work instruction.
• To ensure inspection and test are carried out as per inspection and tests plans and that all quality control mechanisms are being used, results of such to conform to specifications.
• To submit sample materials and calibration to relevant Consultants for approval.
• To prepare works subprogramme & progress report, update site issue and reporting to Management.
• Attend site and project meeting as required.
• Resolve technical matters at site, if required.
• Any other duties that may be assigned by Management from time to time.

Requirements :

• At least 3 years of working experience in building construction; sub-structure, superstructure and architectural work.
• Possess a Civil Engineering Degree or Diploma.
• Good Interpersonal skills: able to manage a site team, a group of sub-contractors and consultants.
• English proficiency a must and good knowledge of contracts and write good technical correspondences.
• Remuneration will be commensurate with experience and personal capabilities.
• Fresh graduates are encouraged to apply.

Job Responsibilities:

• Collaborate with cross-functional teams to integrate quality controls into every phase of the production process.
• Interpret customer standards, identify whether customer standards are complete, simultaneously evaluate testing equipment solutions, submit production requests, and follow up on progress.
• Ensure products comply with industry standards, regulations, and customer requirements.
• Stay informed about relevant quality standards and regulatory requirements.
• Conduct inspections and quality tests to identify defects or deviations from quality standards.
• Investigate and analyze root causes of defects or quality issues.
• Implement corrective and preventive actions to address identified problems and prevent recurrence.
• Identify opportunities for process improvement to enhance overall product quality and efficiency.
• Implement continuous improvement initiatives based on data analysis and feedback.
• Collect and analyze customer feedback related to product quality.
• Address customer complaints and work towards continuous improvement based on customer input.

• Collaborating with suppliers to develop and implement quality assurance processes, performing audits, resolving quality issues, and driving continuous improvement initiatives.
• As the primary liaison between the company and its suppliers on quality matters.
• Participate in supplier evaluations within the procurement resource pool and new supplier areas to produce evaluation reports.
• Conduct audits of existing and new suppliers based on procurement resource requirement, follow up to ensure issues identified in the audits are resolved.
• Identify and convert quality information according to the requirements of new projects and ensure effectiveness communication of the information.
• Participate in the development of supplier audit content and plans and ensure the implementation of supplier audit content.
• Conduct periodic on-site audits of suppliers based on their corrective actions to ensure the effectiveness of the actions.

Work Experience Requirements:

• Familiarity with and understanding of quality management systems, such as ISO 9001.
• Proficiency in statistical analysis and the use of quality tools such as Statistical Process Control (SPC), and other quality improvement methodologies.
• Excellent interpersonal and communication skills and high level of computer literacy.

Education Requirements:

• Diploma, degree or equivalent preferred; or more than 3 years of Quality related experience or related training; or equivalent combination of education and experience.

Language(s) Requirements:

• Mandarin, English and Bahasa Malaysia.

Benefits:

• Annual Leave, Sick Leave, Maternity Leave, Paternity Leave, Compassionate Leave.
• Meal allowance, Phone allowance, Attendance allowance, Medical Claim Reimbursement.
• Birthday Gift, Festival Celebration Gift.
• Professional Career Development (training programs, workshop, conferences to enhance skills).
• OT claim based on company policy.

Key Responsibilities:

• Perform routine maintenance tasks on manufacturing equipment to ensure optimal performance and uptime.
• Conduct troubleshooting and diagnostics of equipment issues, identifying root causes and implementing effective solutions to minimize downtime.
• Execute preventive maintenance schedules to prolong equipment lifespan and prevent breakdowns.
• Collaborate with cross-functional teams including Production, Engineering, and Quality Assurance to address maintenance-related issues and optimize production processes.
• Assist in the installation, commissioning, and validation of new equipment and machinery.
• Maintain accurate records of maintenance activities, including work orders, equipment history, and spare parts inventory.
• Adhere to safety protocols and regulations to create a safe working environment for all employees.
• Stay updated on industry trends and best practices in maintenance engineering, recommending improvements to enhance efficiency and reliability.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or related field.
• Strong technical aptitude with a keen interest in manufacturing processes and equipment.
• Excellent problem-solving skills with the ability to troubleshoot mechanical and electrical systems.
• Detail-oriented approach with a commitment to quality and precision.
• Effective communication skills with the ability to collaborate across different teams.
• Proactive mindset with a willingness to learn and adapt to new challenges.
• Prior internship or co-op experience in a manufacturing environment is a plus.
• Familiarity with RFID technology and its applications would be advantageous but not required.

Perks & Benefits

• Employee equity
• Commission and bonus
• Casual dress code
• Medical insurance
• Open culture
• Paid training and development

Job Responsibilities:

• Responsible to complete the customer's immature design proposal into the final design.
• Formulate quotation plans and produce research reports for new process technologies.
• Responsible for cost assessment requirements of in-house developed products.
• Responsible to communicate technical issues during ODM and in-house product quotation stages.
• Responsible for cost assessment requirements of OEM/ODM projects.
• Organize the participating departments to interpret customer quotation information together and confirm with the quotation team on raw materials, mould schemes, production schemes, and packaging schemes; (If involves immature customer design that require our company's design support, as well as projects involving new technologies and processes, needs to be transferred to product designers to provide design and quotation plans)
• Generate a quotation requisition to includes all components for the project, consumables, packaging materials, production equipment, etc.
• Evaluate structural risk points and summarize mould and production process risk points. After project kick off, compile and present the summary to the project manager.
• Follow up on the cost assessment progress of each participating department in the quotation.
• Responsible to communicate issues during the OEM quotation stage.

Work Experience Requirements:

• More than 5 years of related experience or related training
• Experience in Plastic Product structure or Mould Design
• Proficient in the use of drawing software such as CAD, PRO-E/UG, office software such as PPT, Excel, etc.

Education Requirements:

• Diploma or Degree in Engineering (Mechanical, Structural Design / Mould Design) or equivalent preferred

Language(s) Requirements:

• Mandarin, English and Bahasa Malaysia.

Benefits:

• Annual Leave, Sick Leave, Maternity Leave, Paternity Leave, Compassionate Leave.
• Meal allowance, Phone allowance, Attendance allowance, Medical Claim Reimbursement.
• Birthday Gift, Festival Celebration Gift.
• Professional Career Development (training programs, workshop, conferences to enhance skills).
• OT claim based on company policy.

Job Responsibilities:

• Collaborate with cross-functional teams to integrate quality controls into every phase of the production process.
• Interpret customer standards, identify whether customer standards are complete, simultaneously evaluate testing equipment solutions, submit production requests, and follow up on progress.
• Ensure products comply with industry standards, regulations, and customer requirements.
• Stay informed about relevant quality standards and regulatory requirements.
• Conduct inspections and quality tests to identify defects or deviations from quality standards.
• Investigate and analyze root causes of defects or quality issues.
• Implement corrective and preventive actions to address identified problems and prevent recurrence.
• Identify opportunities for process improvement to enhance overall product quality and efficiency.
• Implement continuous improvement initiatives based on data analysis and feedback.
• Collect and analyze customer feedback related to product quality.
• Address customer complaints and work towards continuous improvement based on customer input.

• Collaborating with suppliers to develop and implement quality assurance processes, performing audits, resolving quality issues, and driving continuous improvement initiatives.
• As the primary liaison between the company and its suppliers on quality matters.
• Participate in supplier evaluations within the procurement resource pool and new supplier areas to produce evaluation reports.
• Conduct audits of existing and new suppliers based on procurement resource requirement, follow up to ensure issues identified in the audits are resolved.
• Identify and convert quality information according to the requirements of new projects and ensure effectiveness communication of the information.
• Participate in the development of supplier audit content and plans and ensure the implementation of supplier audit content.
• Conduct periodic on-site audits of suppliers based on their corrective actions to ensure the effectiveness of the actions.

Work Experience Requirements:

• Familiarity with and understanding of quality management systems, such as ISO 9001.
• Proficiency in statistical analysis and the use of quality tools such as Statistical Process Control (SPC), and other quality improvement methodologies.
• Excellent interpersonal and communication skills and high level of computer literacy.

Education Requirements:

• Diploma, degree or equivalent preferred; or more than 3 years of Quality related experience or related training; or equivalent combination of education and experience.

Language(s) Requirements:

• Mandarin, English and Bahasa Malaysia.

Benefits:

• Annual Leave, Sick Leave, Maternity Leave, Paternity Leave, Compassionate Leave.
• Meal allowance, Phone allowance, Attendance allowance, Medical Claim Reimbursement.
• Birthday Gift, Festival Celebration Gift.
• Professional Career Development (training programs, workshop, conferences to enhance skills).
• OT claim based on company policy.

 Job Responsibilities:

• Participate in the complete software development life cycle (SDLC).
• Plan, develop, test and document computer programs according to specifications, applying knowledge of programming techniques and methodologies.
• Prepare test data, test scripts and test coded programs thoroughly to validate completeness and accuracy.
• Prepare development documentation (functional, program, user specification).
• Assist in design system and analysis of program specification.
• Maintain current knowledge of standard programming languages, coding and methods.
• Perform installation and deployment of system.
• Keep abreast with the latest AI trends & integration technologies.
• Attend meeting with clients for requirement studies.

Requirements:

- Bachelor's degree in Computer Science/ Information Technology or in any related fields.

- At least 2-3 year working experience in Asset Management is highly appreciated

- Experienced in leading a team of Software Developers

- Strong knowledge in Dot.Net, C#, VB.Net

- Experience in Microsoft SQL Server, MySQL, Web services, JSON, ,JavaScript and Entity framework.

- Strong analytical skills that are needed to evaluate situations both from a high level perspective as well as in detail.

- Effective verbal and written communication skills in English

- Malaysian citizenship or relevant residence status

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Personal development opportunities

Job scope as follows:

• Candidate are required to execute and perform project or service coordination on assignment basis at customer premises.
• Provide troubleshooting, diagnosis & repairing works on of fluid handling equipment and mechanical rotating related equipment.
• Generate and issue troubleshooting, diagnosis and service report to customer.
• Follow up and obtain approval from customer to execute repair and service activities.
• Assist and pre-arrangement with customer’s for field service activities.

Requirement:

• Candidate with general understanding of mechanical, piping and electrical engineering and fluid handling equipment and experience will be added advantage
• Able to communicate in English / Bahasa and Mandarin
• Possess good customer service with positive mindset.
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering, Engineering (Industrial), Engineering (Mechanical) or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position
• Preferably Senior Executive specialized in Engineering - Industrial or equivalent.
• Relevant experience without certificate may also apply.
• With experience in repair and troubleshooting on pumps will be added advantage.
   

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

Job scope as follows:

• Candidate are required to execute and perform project or service coordination on assignment basis at customer premises.
• Provide troubleshooting, diagnosis & repairing works on of fluid handling equipment and mechanical rotating related equipment.
• Generate and issue troubleshooting, diagnosis and service report to customer.
• Follow up and obtain approval from customer to execute repair and service activities.
• Assist and pre-arrangement with customer’s for field service activities.

Requirement:

• Candidate with general understanding of mechanical, piping and electrical engineering and fluid handling equipment and experience will be added advantage
• Able to communicate in English / Bahasa and Mandarin
• Possess good customer service with positive mindset.
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering, Engineering (Industrial), Engineering (Mechanical) or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position
• Preferably Senior Executive specialized in Engineering - Industrial or equivalent.
• Relevant experience without certificate may also apply.
• With experience in repair and troubleshooting on pumps will be added advantage.
   

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

Required Work Experience for Senior Project Engineer:

1. Chemical Manufacturing Experience:

At least solid 5-7 years of experience in the chemical or petrochemical manufacturing industry.

Hands-on experience with chemical plant operations, process engineering, and plant equipment.

2. Project Management:

Proven track record in managing large-scale capital projects (e.g., plant expansions, upgrades, or new process installations).

Experience with budgeting, scheduling, and cost control for engineering projects.

3. Process Engineering:

In-depth knowledge of chemical process optimization, troubleshooting, and process flow improvements.

Strong ability to analyze and solve complex engineering problems related to manufacturing processes.

4. Equipment and Facility Design:

Experience with designing and commissioning chemical manufacturing plants or major plant equipment.

Proficiency with AutoCAD, SolidWorks, or other design tools for equipment layout and system designs.

5. Team Leadership and Collaboration:

Demonstrated leadership experience, including managing teams of engineers, contractors, and vendors.

Ability to work in a cross-functional team environment with departments like procurement, quality control, and production.

6. Regulatory Compliance:

Experience ensuring that all engineering activities meet environmental and safety regulations.

Familiarity with Hazard and Operability Study (HAZOP) and other risk management techniques in chemical plants.

7. Stakeholder Communication:

Strong communication and reporting skills to liaise with stakeholders, including senior management, contractors, and plant operators.

Ability to present technical details and project progress in clear and concise reports.

8. Continuous Improvement:

Experience leading continuous improvement initiatives within a manufacturing environment.

9. Construction and Commissioning:

Experience in overseeing construction, installation, and commissioning of chemical plant projects.

Knowledge of EPC (Engineering, Procurement, and Construction) contracts and project delivery.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Free snacks / Happy hours
• Regular team activities
• Medical insurance
• Personal leave
• Open culture
• Personal development opportunities
• Paid training and development

Responsibilities

* To meet individual sales target

* To promote after-market sales of fluid handling equipment to wastewater treatment plant contractor and end user & industrial users

* To undertake market development and strengthen the company customer based in assigned market and expand in market share.

Requirements:

* Fews Positions (Industrial / Water & Wastewater)

* Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Mechanical / Industrial) or equivalent.

* At least 1 -2 Year of working experience in the related field is required for this position.

* Required language (S): English,Mandarin and Bahasa Malaysia

* Preferably senior Executive specialized in Marketing / Business Development or equivalent.

* Fresh graduates are welcome to apply

Perks & Benefits

• Commission and bonus
• Company trips
• Open culture
• Personal development opportunities

Responsibilities

* To meet individual sales target

* To promote after-market sales of fluid handling equipment to wastewater treatment plant contractor and end user & industrial users

* To undertake market development and strengthen the company customer based in assigned market and expand in market share.

Requirements:

* Fews Positions (Industrial / Water & Wastewater)

* Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Mechanical / Industrial) or equivalent.

* At least 1 -2 Year of working experience in the related field is required for this position.

* Required language (S): English,Mandarin and Bahasa Malaysia

* Preferably senior Executive specialized in Marketing / Business Development or equivalent.

* Fresh graduates are welcome to apply

Perks & Benefits

• Commission and bonus
• Company trips
• Open culture
• Personal development opportunities

Responsibilities

* To meet individual sales target

* To promote after-market sales of fluid handling equipment to wastewater treatment plant contractor and end user & industrial users

* To undertake market development and strengthen the company customer based in assigned market and expand in market share.

Requirements:

* Fews Positions (Industrial / Water & Wastewater)

* Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Mechanical / Industrial) or equivalent.

* At least 1 -2 Year of working experience in the related field is required for this position.

* Required language (S): English,Mandarin and Bahasa Malaysia

* Preferably senior Executive specialized in Marketing / Business Development or equivalent.

* Fresh graduates are welcome to apply

Perks & Benefits

• Commission and bonus
• Company trips
• Open culture
• Personal development opportunities

Job Description:

• Perform supervisory work; site standing supervision, inspection and monitor work progress at site.
• To plan, coordinate work and make sure site work carry out accordingly to drawing, contract specification, schedule, construction plan, procedures and work instruction.
• To ensure inspection and test are carried out as per inspection and tests plans and that all quality control mechanisms are being used, results of such to conform to specifications.
• To submit sample materials and calibration to relevant Consultants for approval.
• To prepare works subprogramme & progress report, update site issue and reporting to Management.
• Attend site and project meeting as required.
• Resolve technical matters at site, if required.
• Any other duties that may be assigned by Management from time to time.

Requirements :

• At least 3 years of working experience in building construction; sub-structure, superstructure and architectural work.
• Possess a Civil Engineering Degree or Diploma.
• Good Interpersonal skills: able to manage a site team, a group of sub-contractors and consultants.
• English proficiency a must and good knowledge of contracts and write good technical correspondences.
• Remuneration will be commensurate with experience and personal capabilities.
• Fresh graduates are encouraged to apply.

Job Responsibilities:

• Collaborate with cross-functional teams to integrate quality controls into every phase of the production process.
• Interpret customer standards, identify whether customer standards are complete, simultaneously evaluate testing equipment solutions, submit production requests, and follow up on progress.
• Ensure products comply with industry standards, regulations, and customer requirements.
• Stay informed about relevant quality standards and regulatory requirements.
• Conduct inspections and quality tests to identify defects or deviations from quality standards.
• Investigate and analyze root causes of defects or quality issues.
• Implement corrective and preventive actions to address identified problems and prevent recurrence.
• Identify opportunities for process improvement to enhance overall product quality and efficiency.
• Implement continuous improvement initiatives based on data analysis and feedback.
• Collect and analyze customer feedback related to product quality.
• Address customer complaints and work towards continuous improvement based on customer input.

• Collaborating with suppliers to develop and implement quality assurance processes, performing audits, resolving quality issues, and driving continuous improvement initiatives.
• As the primary liaison between the company and its suppliers on quality matters.
• Participate in supplier evaluations within the procurement resource pool and new supplier areas to produce evaluation reports.
• Conduct audits of existing and new suppliers based on procurement resource requirement, follow up to ensure issues identified in the audits are resolved.
• Identify and convert quality information according to the requirements of new projects and ensure effectiveness communication of the information.
• Participate in the development of supplier audit content and plans and ensure the implementation of supplier audit content.
• Conduct periodic on-site audits of suppliers based on their corrective actions to ensure the effectiveness of the actions.

Work Experience Requirements:

• Familiarity with and understanding of quality management systems, such as ISO 9001.
• Proficiency in statistical analysis and the use of quality tools such as Statistical Process Control (SPC), and other quality improvement methodologies.
• Excellent interpersonal and communication skills and high level of computer literacy.

Education Requirements:

• Diploma, degree or equivalent preferred; or more than 3 years of Quality related experience or related training; or equivalent combination of education and experience.

Language(s) Requirements:

• Mandarin, English and Bahasa Malaysia.

Benefits:

• Annual Leave, Sick Leave, Maternity Leave, Paternity Leave, Compassionate Leave.
• Meal allowance, Phone allowance, Attendance allowance, Medical Claim Reimbursement.
• Birthday Gift, Festival Celebration Gift.
• Professional Career Development (training programs, workshop, conferences to enhance skills).
• OT claim based on company policy.

Job scope as follows:

• Candidate are required to execute and perform project or service coordination on assignment basis at customer premises.
• Provide troubleshooting, diagnosis & repairing works on of fluid handling equipment and mechanical rotating related equipment.
• Generate and issue troubleshooting, diagnosis and service report to customer.
• Follow up and obtain approval from customer to execute repair and service activities.
• Assist and pre-arrangement with customer’s for field service activities.

Requirement:

• Candidate with general understanding of mechanical, piping and electrical engineering and fluid handling equipment and experience will be added advantage
• Able to communicate in English / Bahasa and Mandarin
• Possess good customer service with positive mindset.
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering, Engineering (Industrial), Engineering (Mechanical) or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position
• Preferably Senior Executive specialized in Engineering - Industrial or equivalent.
• Relevant experience without certificate may also apply.
• With experience in repair and troubleshooting on pumps will be added advantage.
   

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

Responsibilities:

• Meticulous, confident, highly analytical with excellent problem solving skills and strong leadership to lead a team of site personnel.
• Good communication and negotiation skills and able handle Clients / consultants / sub-contractors effectively.
• Ensure project objective are achieved and projects are delivered successfully in accordance with agreed scope, timeframe, budget, quality and safety standards.

Requirements:      

• Candidate must possess at least a Diploma in Civil Engineering.
• At least 3 years of related working experience.
• Ability to communicate in English, Malay & Mandarin (added advantage due to liaison with China client/main contractor).
• Highly self motivated, good working attitude with high level of professionalism and integrity.

Perks & Benefits

• Yearly bonus based on performance
• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Central location
• Casual dress code
• Medical insurance
• Personal leave
• Personal development opportunities

Job Description:

• Perform supervisory work; site standing supervision, inspection and monitor work progress at site.
• To plan, coordinate work and make sure site work carry out accordingly to drawing, contract specification, schedule, construction plan, procedures and work instruction.
• To ensure inspection and test are carried out as per inspection and tests plans and that all quality control mechanisms are being used, results of such to conform to specifications.
• To submit sample materials and calibration to relevant Consultants for approval.
• To prepare works subprogramme & progress report, update site issue and reporting to Management.
• Attend site and project meeting as required.
• Resolve technical matters at site, if required.
• Any other duties that may be assigned by Management from time to time.

Requirements :

• At least 3 years of working experience in building construction; sub-structure, superstructure and architectural work.
• Possess a Civil Engineering Degree or Diploma.
• Good Interpersonal skills: able to manage a site team, a group of sub-contractors and consultants.
• English proficiency a must and good knowledge of contracts and write good technical correspondences.
• Remuneration will be commensurate with experience and personal capabilities.
• Fresh graduates are encouraged to apply.

Responsibilities:

• To identify and qualify opportunities to increase sales volume.
• Manage sales through forecasting, qualification, account strategy, and planning.
• Develop solution proposals encompassing all aspects of the deal.
• Participate in the development, presentation and sales of a value proposition.
• Negotiate pricing and contractual agreements to close the sale.
• To develop and identify new market and customer.

Requirements:

• Candidate must possess at least a Professional Certificate, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, any field.
• Required language(s): Bahasa Malaysia, English, 
• At least 3 year of sales experience in the industry sales is required for this position.
• Applicants must be willing to work in Puchong
• Direct report to country manager.
• Full-Time positions available.
• Diploma or Degree in Business/ Engineering/ Science
• Possess own transport and willing to travel in Malaysia and oversea. 

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Company trips
• Medical insurance
• Personal leave
• Personal development opportunities
• Dental insurance
• Paid training and development

Job Description:

• Perform supervisory work; site standing supervision, inspection and monitor work progress at site.
• To plan, coordinate work and make sure site work carry out accordingly to drawing, contract specification, schedule, construction plan, procedures and work instruction.
• To ensure inspection and test are carried out as per inspection and tests plans and that all quality control mechanisms are being used, results of such to conform to specifications.
• To submit sample materials and calibration to relevant Consultants for approval.
• To prepare works subprogramme & progress report, update site issue and reporting to Management.
• Attend site and project meeting as required.
• Resolve technical matters at site, if required.
• Any other duties that may be assigned by Management from time to time.

Requirements :

• At least 3 years of working experience in building construction; sub-structure, superstructure and architectural work.
• Possess a Civil Engineering Degree or Diploma.
• Good Interpersonal skills: able to manage a site team, a group of sub-contractors and consultants.
• English proficiency a must and good knowledge of contracts and write good technical correspondences.
• Remuneration will be commensurate with experience and personal capabilities.
• Fresh graduates are encouraged to apply.

Job Responsibilities

1. Establishing and maintaining the management system for subsidiary companies.

2. Managing system coordinators and internal auditors of subsidiary companies (including selection, training, and accreditation).

3. Implementing and closing the findings on system audits at subsidiary companies and business units.

4. Implementing the process and the roles of process management in subsidiary companies according to headquarters' plans.

5. Promoting best practices in process management.

6. Implementing and closing the findings on process audits at subsidiary companies and business units.

7. Implementing and optimizing document management in subsidiary companies, including processes, document management platforms, and BU document control personnel.

8. Collecting local improvement suggestions and assisting headquarters' QMD in platform optimization management.

Job Requirement

1. Bachelor’s degree in a related field of study (i.e. Science, engineering, management, operations research/management, etc.)
2. At least 3 years of working experience in Quality Engineering or a similar role; audit field, lead and manage quality systems implementation.
3. Demonstrated background in an ISO 9001, ISO13485, ISO 14001, ISO45001, ISO 27001, RBA or comparable quality and regulatory system.
4. Strong communication, presentation, interpersonal, and organizational skills.
5. Knowledge and ability to understand and apply process audit principles (ISO).
6. Proficient using MS Office Suite

Perks & Benefits

• 13 Month salary
• Performance Bonus
• Insurance
• Dental Allowance
• Free Parking

Job scope as follows:

• Candidate are required to execute and perform project or service coordination on assignment basis at customer premises.
• Provide troubleshooting, diagnosis & repairing works on of fluid handling equipment and mechanical rotating related equipment.
• Generate and issue troubleshooting, diagnosis and service report to customer.
• Follow up and obtain approval from customer to execute repair and service activities.
• Assist and pre-arrangement with customer’s for field service activities.

Requirement:

• Candidate with general understanding of mechanical, piping and electrical engineering and fluid handling equipment and experience will be added advantage
• Able to communicate in English / Bahasa and Mandarin
• Possess good customer service with positive mindset.
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering, Engineering (Industrial), Engineering (Mechanical) or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position
• Preferably Senior Executive specialized in Engineering - Industrial or equivalent.
• Relevant experience without certificate may also apply.
• With experience in repair and troubleshooting on pumps will be added advantage.
   

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

工作職責：

• 負責將客戶不成熟的設計方案完成轉化為最終設計。
• 制定新製程技術的報價計畫並出具研究報告。
• 負責內部開發產品的成本評估需求。
• 負責ODM和內部產品報價階段的技術問題溝通。
• 負責OEM/ODM專案的成本評估需求。
• 組織參與部門共同解讀客戶報價訊息，並與報價團隊確認原料、模具方案、生產方案、包裝方案； （如涉及不成熟的客戶設計需要我司設計支持，以及涉及新技術、新工藝的項目，需要轉交給產品設計師提供設計和報價方案）
• 產生報價申請，包括項目的所有組件、消耗品、包裝材料、生產設備等。
• 評估結構風險點，總結模具和生產流程風險點。專案啟動後，編制總結並提交給專案經理。
• 跟進報價單中各參與部門的成本評估進度。
• 負責OEM報價階段的溝通問題。

工作經驗要求：

• 5年以上相關經驗或相關培訓
• 有塑膠產品結構或模具設計經驗
• 熟練使用CAD、PRO-E/UG等繪圖軟體，PPT、Excel等辦公室軟體。

教育背景要求：

• 工程文憑或學位（機械、結構設計/模具設計）或同等學歷優先

語言要求：

• 國語、英語和馬來語。

好處：

• 年假、病假、產假、陪產假、喪假。
• 膳食津貼、電話津貼、出勤津貼、醫療報銷。
• 生日禮物，節日慶典儀式。
• 專業職涯發展（培訓計畫、研討會、提陞技能的會議）。
• 根據公司政策提出加班索賠。