Total 571 job vacancies by Recruitment Innovations Pty Ltd

A & G Engineering is Australia’s leading designers and fabricators of stainless-steel tanks and vessels. They are currently looking to expand their team by recruiting several experienced and qualified Welders / Metal Fabricators to join their team in Griffith NSW 2680.


The successful candidate will need to undertake and possess:

- Adhere to WHS
- Ability to read and interpret drawings to a high standard and recognising welding specifications
- Set up equipment and weld parts, using appropriate welding equipment and methods
- Set up and operate fabricating machines such as shears, brakes, presses, forming rolls and routers, to cut, bend and form or straighten materials
- Proficiency in MIG, TIC and Arc welding
- All aspects of general fabrication, welding, and sheet metal work
- Ability to use Heavy machinery such as Booms & Scissor Lifts


Skills and Abilities:

- At least 3 years’ experience as a Welder / Metal Fabricator
- Certificate III in Engineering Fabrication or equivalent


Salary range is $70,000-$85,000pa commensurate with experience

Several Fulltime Positions available


Applications open 14th of November 2024 and closes on 14th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

ARB Windsor are seeking experienced and qualified Light Vehicle Technicians to join their Service Department in Vineyard NSW 2765.

The ideal candidates must have an eye for detail, show pride in their work as well as having a ‘can do’ attitude.

Purpose / Main area of Responsibilities:

Perform a range of engine & mechanical tests, to diagnose, repair and service as detailed per product warranty guidelines, company policy and instructions to high level of quality in an efficient manner.


The successful candidate will need to undertake and possess:

- Providing expert advice in relation to current mechanical condition of vehicles.
- Perform engine upgrades, rebuilding, repairs required and scheduled maintenance servicing.
- Repair or install suspension kits/lift kits as required.
- GVM upgrades on 4WD vehicles to meet legislative restrictions, including rear leaf springs replacement.
- Long range Fuel tank replacements to meet all compliance restrictions.
- Installation/replacement of Catch Cans, pre-fuel filter kits etc
- Repair or installation of general mechanical 4WD accessories
- Maintain sound knowledge of all ARB and partners mechanical products and services.
- Maintaining a safe working environment through ensuring the correct operation of all tools and specialised equipment.
- Ensuring the safe work practices
- Be responsible for the maintenance and cleanliness of the Workshop.
- Be responsible for the care and use of all workshop tools and equipment and return to correct place after use.
- Providing high level guest service


Required Experience, skills and Qualifications:

- Must have a minimum of three years’ experience as a qualified Motor Mechanic
- Certificate III in Light Vehicle Mechanical Technology or equivalent
- Current Driver's License
- Excellent communication skills and the ability to work in a team environment


Salary range is $70,000 - $85,000pa commensurate with experience

Full-time Positions available


Applications open 14th of November 2024 and closes on 14th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

AM & S Ciavarella Management Pty Ltd is currently recruiting for an experienced and qualified Farm Operations and Innovation Manager to join their team in Stanbridge, NSW 2705.


The successful candidate will be responsible of:


- Operations Manager of all farming duties of our mixed farming enterprise comprising of Viticulture, Horticulture, Summer Cereal Cropping, Winter Cereal Cropping, Fat Lamb production.
- Day to day management of the maintenance, service and repair of Ciavarella Farm’s various Agricultural Machineries and Equipment.
- Managing our various rental accommodations.
- Assist in managing operations of our transport business.
- Incorporate Innovation into Operations and look at funding options in the Innovation space.

Skills & Abilities:


- Relevant Farm Management experience in Australia or similar and AQF Associate Degree.
- Be Honest and respectful to others.
- Be able to work Cooperatively.
- Ideally have farm machinery experience.
- Be able to work independently.
- Have strong mechanical diagnostics ability.
- Minimum 3 years’ experience as a qualified Agronomist or Farm Operations Manager. Agricultural industry understanding is strongly preferred.

Salary range is $70,000 - $85,000 per year commensurate with experience

Fulltime Position available


Applications open 14th of November 2024 and closes on 14th December of 2024.


If you are interested in this role APPLY now

HE Silos Gunnedah are currently looking to recruit an experienced and qualified Welder/Metal Fabricator to join their team in Gunnedah NSW 2380.


The successful candidate will need to undertake and possess:

- Being able to read and analyse blueprints and drawings
- Have the ability and experience to use a TIG and MIG welder
- Examining welds for the width of bead, penetration and precision
- Have the ability to weld vertically, horizontally and overhead
- Be able to weld various metals using various techniques
- Cut, roll, shape, bend, mould, spin, heat or hammer metal products to fabricate parts or sub-assemblies
- Heat treat metal parts and components
- Set up and/or operate hand and machine tools, welding equipment
- Assemble parts and structures by lining up and joining them by welding, bolting or riveting
- Finish products by cleaning, polishing, filing or bathing them in acid solutions, or by applying protective or decorative coatings.

Skills & Abilities:

- Certificate III in Engineering (Welding Fabrication) or equivalent qualification
- Minimum of three years’ experience in this role or similar
- Ability to work in a team environment


Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Position available


Applications open 14th of November 2024 and closes on 14th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Griffith McDonald’s Restaurants (Maccas) are looking for great people! We are currently looking to recruit an experienced and qualified Hospitality, Retail & Services Managers to join their team in Griffith NSW 2680. This role will suit a highly motivated, operations focused applicant who has completed LTS as a minimum has the skills to motivate a team and whilst being a professional employee but also having great fun along the way! Work directly with the licensee and get in control of your own future.

Duties and Responsibilities:

- Shift Management including training
- Set goals and action plans for the Restaurant within Shift Supervisor / Manager Responsibilities.
- Ensuring outstanding customer service and operations are a focus each day you work.
- Implementation and follow up of Food Safety procedures.
- Oversee and manage staff, with selected Department responsibilities
- Ability to achieve financial budgets.
- Maintain WH&S standards and cleanliness within the restaurant
- Ensure security is strictly always adhered to.

Skills & Experience:

- Ability to demonstrate McDonald’s KPI historical results / performance
- The ability to train and develop team members
- Proven staff management and leadership skills
- A hands-on approach
- Impeccable presentation and clear, concise communication
- A focus on policies and procedures
- A passion for delivering high standards of customer service
- Attention to detail
- Certificate III in Hospitality or relevant experience

What we offer:

- Above award salaries *great bonus scheme
- Relocation assistance available for the right candidates
- Multiple positions available
- Assured Future Career Growth
- You have total control over your career progression
- Continuous training
- Car/s Australian and Overseas Holidays / Corporate events all paid for.

Salary range is $65,000 - $75,000pa commensurate with experience

Fulltime Position available


Applications open 14th of November 2024 and closes on 14th December of 2024.


If this unique opportunity sound like one you would like to pursue, please click on Apply. Only shortlisted candidates will be contacted.

Almighty Industries are currently looking to recruit an experienced and qualified Fitter General to join their team in Orange NSW 2800.


The successful candidate will need to undertake and possess:

- Reviewing drawings, specifications, and blueprints to determine suitable equipment and actions required.
- Fitting, assembling, and examining metal parts and subassemblies to produce machines and equipment accurately, also diagnosing and repairing faults.
- Placing controls on machining tools and textile machines.
- Forming metal stock and castings to fine tolerances using machining tools and installing hydraulic and pneumatic pipes and lines.

Skills and Abilities:

- Certificate III in Engineering Mechanical Trade or equivalent qualification
- Minimum of 3 years’ experience in this role or similar
- Ability to work in a team environment.

Salary range is $70,000 - $85,000pa commensurate with experience.

Fulltime Position available


Applications open on 14th of November 2024 and closes on 14th of December 2024

If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Port Stephens Toyota and Maitland Toyota are currently looking to recruit an experienced and qualified Motor Mechanic to join their team in Maitland NSW 2320.



The successful candidates will need to undertake and possess:

- Extensive experience in repairs and maintenance in line with the manufacturers’ requirements for all make and models
- The ability to perform scheduled maintenance servicing
- The capacity to service and repair vehicles as per the repair order with the allocated time
- Good verbal and written communications skills
- Strong diagnostics capabilities


Skills & Abilities:

- Certificate III in Light Vehicle Mechanical Technology or equivalent
- Ideally have a minimum of three years’ experience as a qualified Light Vehicle Technician
- A strong knowledge of vehicle maintenance and repair
- The ability to work in a team environment


Salary range is $70,000-$85,000pa commensurate with experience

Fulltime Position available


Applications open on 14th of November 2024 and closes on 14th of December 2024

If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

B&D Engineering are currently looking to recruit an experienced and qualified Metal Machinist to join their team in Griffith NSW 2680.

The successful candidate will need to undertake and possess:

- Study and read drawings and specifications to determine suitable material, method and sequence of operations and machine settings.
- Fit fabricated metal parts into products and assembling metal parts to produce machines and equipment.
- Setting guides, stops and other controls on machining tools, setting up prescribed cutting and shaping tools in machines and presses, and setting controls for machines.
- Forming metal stock and casting to fine tolerances using machining tools to press, cut, grind, plane, bore and drill metal.
- Cutting, threading, bending, and installing hydraulic and pneumatic pipes and lines
- Diagnosing faults and performing operational maintenance of machine, and overhauling and repairing mechanical parts and fluid power equipment

Skills & Abilities:

- Certificate III in Engineering Mechanical trade
- Ideally have a minimum of 3 years’ experience in a related field
- Experience with beams lines and plasma plate cutting.

Salary range is $70,000 - $85,000pa commensurate with experience.

Fulltime Position available


Applications open on 14th of November 2024 and closes on 14th of December 2024


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Max Orman Toyota are currently looking to recruit an experienced and qualified Light Vehicle Technician to join their team in Wee Waa NSW 2388.

The successful candidates will need to undertake and possess:

- Extensive experience in repairs and maintenance in line with the manufacturers’ requirements for all make and models
- The ability to perform scheduled maintenance servicing
- The capacity to service and repair vehicles as per the repair order with the allocated time
- Good verbal and written communications skills
- Strong diagnostics capabilities

Skills & Abilities:

- Certificate III in Light Vehicle Mechanical Technology or equivalent
- Ideally have a minimum of three years’ experience as a qualified Light Vehicle Technician
- A strong knowledge of vehicle maintenance and repair
- The ability to work in a team environment

Salary range is $70,000-$85,000pa commensurate with experience.

Fulltime Position available


Applications open 13th of November 2024 and closes on 13th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted.

Coniston Bakery are currently looking to recruit an experienced and qualified Baker to join their team in Coniston NSW 2500.

The successful candidates will need to undertake and possess:

- Preparing, mixing, cutting and shaping dough ready for baking ·
- Monitor proving, cooking and cooling times, and ensuring appearances of items are consistent
- Various baking techniques and methods
- Weighing ingredients and keeping track of production schedule
- Stock management and ordering
- Cleaning and equipment upkeep

Skills and Abilities:

- Ideally have a Certificate III in Baking / Certificate III in Breadmaking or equivalent
- Minimum of 3 years’ experience in relevant field
- Ability to work in a team environment

Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Position available


Applications open 13th of November 2024 and closes on 13th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Coniston Bakery are currently looking to recruit an experienced and qualified Pastry Chef to join their team in Coniston NSW 2500.

The successful candidates will need to undertake and possess:

- Preparing, mixing, cutting and shaping dough and pastry ingredients
- Monitor proving, cooking and cooling times, and ensuring appearances of items are consistent
- Various baking techniques and methods
- Weighing ingredients and keeping track of production schedule
- Stock management and ordering
- Cleaning and equipment upkeep adhering to sanitation and safety regulations

Skills and Abilities:

- Ideally have a Certificate III in Patisserie or equivalent
- Minimum of 3 years’ experience in relevant field
- Ability to work in a team environment
- OH&S awareness
- Food handling and RSA certificates

Salary range is $70,000- $85,000pa commensurate with experience

Fulltime Positions available


Applications open 13th of November 2024 and closes on 13th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Collier and Miller is here to help you source and supply a huge range of specialty and consumer products within the Agricultural, Engineering and industrial sectors. We are currently seeking to hire qualified and experienced Welders / Metal Fabricators to join our manufacturing department at Griffith NSW 2680.


The successful candidate will need to undertake and possess:

- Being able to read and analyse blueprints and drawings
- Have the ability and experience to use a TIG and MIG welder
- Examining welds for the width of bead, penetration and precision
- Have the ability to weld vertically, horizontally and overhead
- Be able to weld various metals using various techniques.
- Cut, roll, shape, bend, mould, spin, heat or hammer metal products to fabricate parts or sub-assemblies
- Heat treat metal parts and components
- Set up and/or operate hand and machine tools, welding equipment
- Assemble parts and structures by lining up and joining them by welding, bolting or riveting
- Finish products by cleaning, polishing, filing or bathing them in acid solutions, or by applying protective or decorative coatings.


Skills & Abilities:

- Certificate III in Fabrication and Welding or equivalent
- Ideally have a minimum of 3 years’ experience in similar role
- Ability to work in a team environment


Salary range is $70,000 - $85,000 commensurate with experience

Multiple Full-time Positions available


Applications open 13th of November 2024 and closes on 13th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Liftek Australia Pty Ltd is a local company based in Griffith NSW carrying a large range of quality new and used equipment for sale, including many makes and models of forklifts. We are also stockists of a large range of material handling and cleaning equipment. Currently we are seeking to employ two qualified and experienced Fitter to join our workshop in Griffith NSW 2680.

The successful candidate will need to undertake and possess:

- Reviewing drawings, specifications, and blueprints to determine suitable equipment and actions required.
- Fitting, assembling, and examining metal parts and subassemblies to produce machines and equipment accurately, also diagnosing and repairing faults
- Creating a suitable maintenance schedule and performing system maintenance accordingly
- Conducting diagnostic testing on malfunctioning systems to determine root cause of the malfunction
- Replacing damaged or defective structural components as needed.
- Adhering to all work - site safety rules and regulations.

Skills and Abilities:

- Certificate III in Engineering Mechanical Trade or equivalent qualification

- Minimum of 3 years’ experience in this role or similar

- Ability to work in a team environment

Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Position available


Applications open 13th of November 2024 and closes on 13th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Liftek Australia Pty Ltd is currently looking for a qualified and experienced Painting Trades Worker to join their team in Griffith, NSW 2680.

About the company:

Liftek is a privately owned company based in Grifftih that have over 25 years of experience providing supply and service for industrial, access and cleaning equipment of high-quality brands such Toyota, Karcher, Skyjack among others.

About the position:

Blaster Painters within our company will be required to complete the following tasks, including but not limited to.

- Surface preparation using a range of hand tools and chemicals which may include abrasive blasting, solvent cleaning, dry blasting with air compressor and wiping with rags.
- Painting of prepared surfaces using airless spray machines, air compressors and all safety equipment including breathing apparatus.
- Equipment preparation and maintenance/repairs of all equipment including blasting machine, airless spray machine, air compressor, spray nozzles and hose attachments.
- At times you will be required to act as a Spotter for another worker. This will include safely monitoring their work environment and personal well-being.

Qualifications, Skills & Abilities required:

- Relevant trade qualification
- Minimum 3 years of hands-on experience
- Ability to use a variety of hand tools and equipment such as air compressors, spray machines and ability to work with breathing apparatus and safety equipment.
- Ability to participate in all required safety training.
- Ability to use forklift and cranes will be necessary.
- All relevant training will be provided immediately upon arrival and further update training will be schedules at required intervals.


Salary range is $70,000 - $85,000 commensurate with skills and experience.

Fulltime Positions Available


Applications open 13th of November 2024 and closes on 13th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted.

Collier & Miller is here to help you source and supply a huge range of specialty and consumer products within the Agricultural, Engineering and industrial sectors. We are currently seeking to hire a qualified and experienced Mechanical Trade (Fitting) to join our manufacturing department in Griffith NSW 2680.

Mechanical Trade (Fitting)
At Collier & Miller, a Fitter is an advanced mechanical technician specializing in the installation,
manufacturing, maintenance, and repair of industrial machinery, parts, and mechanical systems. This
role requires a high level of technical expertise, advanced problem-solving skills, and a strong
commitment to safety.

Core Capabilities:

Precision Installation and Assembly:

- Lead installation and assembly of machinery, including pumps and electric motors, ensuring
precise alignment to engineering standards
- Utilize advanced fitting techniques, including CNC programming, tool setting, and high precision machinery, to manufacture, shape, align, and assemble parts and subassemblies
with exact tolerances

Expert Maintenance and Repairs:

- Perform in-depth diagnostics on mechanical systems to identify faults and determine the
best repair methods, ensuring rapid resolution and minimal disruption to operations
- Repair, test, and reassemble critical equipment, including fluid power systems, to uphold
safety and operational integrity

Technical Interpretation and CNC Programming:

- Interpret engineering drawings and specifications to guide material selection, machining, and
operations
- Program CNC machinery and adjust setups to meet detailed technical requirements of each
Project

Machining and Assembly of Metal Parts:

- Fabricate and install metal parts and subassemblies for machines and equipment, ensuring
proper fit and alignment using high-precision measuring tools and techniques
- Fit, assemble, and inspect metal components for accuracy, clearance, and precise
functionality within machinery

Hydraulic and Pneumatic System Installation:

- Cut, thread, bend, and install hydraulic and pneumatic lines, adhering to safety and
operational standards

Operational Maintenance and System Overhaul:

- Perform maintenance and overhauls on mechanical and fluid power systems to ensure
consistent operational performance
- Recommend preventative maintenance to optimize machinery longevity and efficiency
Advanced Troubleshooting:
- Diagnose and resolve complex mechanical issues, providing process improvements for
enhanced system functionality and efficiency

Skills and Qualifications Required:

Advanced Certification in Mechanical Fitting and Engineering:
- Certificate III in Engineering - Mechanical Trade or equivalent qualification, with extensive
experience in industrial mechanical fitting and system maintenance

Extensive Technical Expertise in Mechanical Systems:

- Advanced knowledge of mechanical, hydraulic, and pneumatic systems, including the
operation of specialized equipment such as CNC lathes

Leadership and Mentorship Abilities:

- Demonstrated ability to mentor junior staff and provide leadership in complex maintenance
tasks, fostering technical growth and team improvement


Salary range is $70,000 - $85,000pa commensurate with experience

Full-time Position available


Applications open 13th of November 2024 and closes on 13th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted