Total 147 Maintenance / Repair job vacancies in Portland Plant - Portland, Maine

The principal workload responsibility of this position is inspection, maintenance, repair, servicing, modification, adjustment, and calibration of the following electrical and mechanical systems associated with assigned aids to air navigation: (1)engine-driven standby power generation equipment, (2)electrical systems, (3)air-conditioning, heating, and ventilation systems, and (4) communications and control cables; and all other physical plant and structures workload such as: (1) antenna towers and poles, (2)buildings and structures, (3)roads and grounds, and (4) utilities (sewerage and water).

Typical duties include:

Working from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals to plan and lay out the routing, placement type, size, gauge, balance, load, continuity, and safe operation of electrical lines, circuits, systems, equipment and controls. Determines and places distribution panels, boxes, fittings, and connections and install wiring, couplings, conduit, relays, fixtures, transformers and other electrical devices including electrical service entrances.

Installing and repairing systems used to condition the air for different kinds of structures such as warehouses, ships, hangars, hospitals, submarines, and large office buildings and complexes, including those with areas that have special requirements such as communication centers, electronic data processing centers, operating rooms, laboratories, clean rooms, and other areas with sensitive equipment. Systems use a variety of methods of air conditioning such as mechanical compression, vapor compression, absorption, and steam jet or air cycle.

Sets up and operates a wide variety of wood working machines and tools. Assemble items with a variety of joining techniques such as miters, rabbets, dados, biscuit, and mortise and tenon, and use glues and adhesives to secure wood pieces, veneers, and counter tops. Use wood, metal and various composite materials when installing or repairing interior partitions, flooring, panels, suspended ceilings, counter tops, and moldings. Interprets drawings, blueprints, and specifications independently, and determines the layout and work sequences and types of lumber or special related materials. Plans and carries out projects from initial layout to completion. Responsible for accuracy, spacing, fit, and structural soundness and finished appearance, which are essential.

The supervisor checks overall work to see that it meets accepted standards and is completed in a timely manner. Incumbent may be required to do a moderate amount of travel.

Starting at $29.61 Per Hour (FW 10)

The principal workload responsibility of this position is inspection, maintenance, repair, servicing, modification, adjustment, and calibration of the following electrical and mechanical systems associated with assigned aids to air navigation: (1)engine-driven standby power generation equipment, (2)electrical systems, (3)air-conditioning, heating, and ventilation systems, and (4) communications and control cables; and all other physical plant and structures workload such as: (1) antenna towers and poles, (2)buildings and structures, (3)roads and grounds, and (4) utilities (sewerage and water).

Typical duties include:

Working from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals to plan and lay out the routing, placement type, size, gauge, balance, load, continuity, and safe operation of electrical lines, circuits, systems, equipment and controls. Determines and places distribution panels, boxes, fittings, and connections and install wiring, couplings, conduit, relays, fixtures, transformers and other electrical devices including electrical service entrances.

Installing and repairing systems used to condition the air for different kinds of structures such as warehouses, ships, hangars, hospitals, submarines, and large office buildings and complexes, including those with areas that have special requirements such as communication centers, electronic data processing centers, operating rooms, laboratories, clean rooms, and other areas with sensitive equipment. Systems use a variety of methods of air conditioning such as mechanical compression, vapor compression, absorption, and steam jet or air cycle.

Sets up and operates a wide variety of wood working machines and tools. Assemble items with a variety of joining techniques such as miters, rabbets, dados, biscuit, and mortise and tenon, and use glues and adhesives to secure wood pieces, veneers, and counter tops. Use wood, metal and various composite materials when installing or repairing interior partitions, flooring, panels, suspended ceilings, counter tops, and moldings. Interprets drawings, blueprints, and specifications independently, and determines the layout and work sequences and types of lumber or special related materials. Plans and carries out projects from initial layout to completion. Responsible for accuracy, spacing, fit, and structural soundness and finished appearance, which are essential.

The supervisor checks overall work to see that it meets accepted standards and is completed in a timely manner. Incumbent may be required to do a moderate amount of travel.

Starting at $29.61 Per Hour (FW 10)

• Researches current accounts, historical data, source documents, etc., to develop and explain detailed information not otherwise readily available.
• Researches accounting data and performs balancing and reconciling of accounts.
• Processes all types of accounting transactions and requests for establishment of additional accounting records.
• Verifies the accuracy, completeness, and validity of a wide variety of accounting functions/transactions including: obligations; accrued expenditures; disbursements; appropriation refunds; reimbursable orders; earnings and collections.
• Assists in implementing and maintaining Internal Control Program requirements to protect against waste, fraud, and abuse.

Starting at $39,576 Per Year (GS 5)

• Researches current accounts, historical data, source documents, etc., to develop and explain detailed information not otherwise readily available.
• Researches accounting data and performs balancing and reconciling of accounts.
• Processes all types of accounting transactions and requests for establishment of additional accounting records.
• Verifies the accuracy, completeness, and validity of a wide variety of accounting functions/transactions including: obligations; accrued expenditures; disbursements; appropriation refunds; reimbursable orders; earnings and collections.
• Assists in implementing and maintaining Internal Control Program requirements to protect against waste, fraud, and abuse.

Starting at $44,117 Per Year (GS 6)

EVS Technician Total Rewards

The Housekeeping Aide - EVS Technician executes a full range of housekeeping activities in patient and non-patient care areas.
The position may be assigned to any tour and may be required to work in various designated areas during any tour of duty.
Typically, the position works independently with general supervision, or works with a team and is responsible for the full-range of cleaning duties in an assigned area throughout the medical facility.

These duties include, but are limited to the following:

• Performs floor maintenance, wall washing.
• Cleans doors, doorframes, baseboard corners and edges, and stairwells.
• Tasks are accomplished by sweeping, dust mopping, damp and wet mopping, scrubbing, stripping, refinishing, buffing, vacuuming and extracting carpets and runners, spot cleaning areas, and high and low dusting.
• Periodically utilizes pressure washers and heavy industrial powered and battery­ operated equipment the above task.
• Adjusts, cleans, and performs minor maintenance on this equipment and changes attachments for their proper use in achieving the best results.
• Empties trash and wastebaskets, replaces liners. Transports general refuse, regulated medical waste and recycling to central collection areas.
• Cleans rest rooms, bathrooms, and shower rooms, ensuring that they are cleaned and meet acceptable standards (cleans, disinfects, and deodorizes lavatories, showers, bathtubs, urinals, and toilet bowls; cleans mirrors, sinks, and water fountains; washes and polishes light and toilet fixtures). Replenishes supplies of paper towels, toilet paper, hand sanitizers, and soap in all areas where dispensers are located.
• Moves and arranges furniture, patient wardrobes, beds, etc. in the assigned area to accomplish cleaning tasks.
• Provides bed-making services in patient care areas and OD rooms; cleans mattresses, springs, and bed frames; and cleans bedside stands, over bed lights, blood pressure cuffs, bed tables, etc. in patient rooms; Removes bags of soiled textiles from patient rooms and transports to the designated soiled room in each ward area; Loads and unloads clean textiles from bulk carts.
• Restocks clean textile closets, cabinets, shelves, carts, and participates in inventory management activities.
• Defrosts and cleans patient care refrigerators and ice machines in nourishment kitchen areas; cleans stainless steel on storage instrument cabinets and counters, elevators in lobbies, wards, diet-kitchens and nurse utility rooms; and cleans ashtrays, smoke stands, sand urns in designated smoke areas and water fountains; Provides interim cleaning of windows and window ledges from the inside, cleans glass door and other glass surfaces; and replaces curtains and cleans blinds.
• Cleans and/or replaces needle boxes.
• Periodically cleans specific non-critical Reusable Medical Equipment (RME) in inpatient and clinical areas of the medical center.

Work Schedule: Permanent, Full Time positions, 1st shift, 2nd shift and 3rd shift are available, which also includes weekdays, weekends, holidays. Shifts may change to meet the need of the Agency.
Position Description Title/PD#: Housekeeping Aide - EVS Technician/PD99909-S
Physical Requirements: The position demands continuous walking, standing, stooping, kneeling, pulling, and pushing. The work requires the occasional use of heavy powered cleaning equipment (e.g., wall washers, industrial type buffers) weighing over 50 pounds. The duties necessitate considerable dexterity, hand, foot, and eye coordination, and concentration as well as visual acuity to see dirt, dust and debris.
Pay: Competitive salary and regular salary increases When setting pay, a higher step rate of the appropriate grade may be determined after consideration of higher or unique qualifications, or special needs of the VA (Above Minimum Rate of the Grade).
Recruitment Incentive: Authorized
Paid Time Off: 37-50 days of annual paid time offer per year (13-26 days of annual leave, 13 days of sick leave, 11 paid Federal Holidays per year). Selected applicants may qualify for credit toward annual leave accrual, based on prior federal work experience or military service experience.
Parental Leave: After 12 months of employment, up to 12 weeks of paid parental leave in connection with the birth, adoption, or foster care placement of a child.
Child Care Subsidy: After 60 days of employment, full time employees with a total family income below $144,000 may be eligible for a childcare subsidy up to 25% of total eligible childcare costs for eligible children up to the monthly maximum of $416.66.
Retirement: Traditional federal pension (5 years vesting) and federal 401K with up to 5% in contributions by VA
Insurance: Federal health/vision/dental/term life/long-term care (many federal insurance programs can be carried into retirement)

Starting at $19.90 Per Hour (WG 2)

This position is located in the Army or Air National Guard. Its purpose is to provide storage and distribution, cataloging or supply identification systems, property utilization, or other related supply activities including those associated with automated or manual supply accounting systems.

-- Performs routine and nonroutine material coordination duties for special programs, maintenance, or production shops.

-- Responsible for local management of decentralized and decontrolled items which requires technical intervention to assure effective supply support and economy. Items are less stable or standardized and do not lend themselves to routine control through the use of the computer and variable supply level formulas. Plans requirements, both quantitative and monetary, to satisfy customer needs. Authorizes procurement and is responsible for funds management.

-- Responsible for limited aspects of storage management. May develop and install local procedures and techniques to achieve and maintain smooth, effective, and coordination storage operations.

-- Performs other duties as assigned.

Starting at $49,025 Per Year (GS 7)

At The Midfield Group, we are dedicated to fostering growth and sustainability for our suppliers, company, customers, and the communities we serve, all while delivering high-quality Australian products worldwide. As a privately-owned company, The Midfield Group offers a genuine 'Paddock to Plate' experience. We own and manage farms, factories, and distribution channels, ensuring complete control over the essential aspects of bringing livestock from paddock to plate.

We are currently seeking a Mechanical Engineering Technician who will play a pivotal role in assisting in mechanical equipment design, selecting tools and equipment, installing mechanical assemblies, performing tests, collecting, and analysing data, and ensuring compliance with specifications and regulations.

MAIN DUTIES & RESPONSIBILITIES:
-Preparing drawings, plans and designs for mechanical engineering work under the direction of Mechanical Engineers and Engineering --Technologists
-Assisting Mechanical Engineers and Engineering Technologists in the design of mechanical equipment and plant
selecting tools and equipment
-Assembling and installing new and modified mechanical assemblies, components, machine tools and controls, and hydraulic power systems
-Estimating material costs and quantities, and machine requirements
-Performing and directing field and laboratory tests
-Collecting and analysing data, carrying out complex computations and preparing diagrams
-Organising and supervising inspection and maintenance of machines and plant
-Ensuring that designs and finished work are within specifications, regulations and contract provisions

SKILLS & EXPERIENCES:
-Experience in mechanical design, testing, data collection, and analysis
-Strong attention to detail, organizational skills, and problem-solving abilities
-Ability to work independently and as part of a team
-Knowledge of safety protocols and procedures in a manufacturing environment

As part of The Midfield Group, you will also have access to our comprehensive employee benefits program:
-Above award base rates, generous bonuses & opportunity for career progression within our global organisation
-Safe and supportive work environment by providing an Employee Assistance Program
-On site canteen, free parking, staff discounts, monthly staff BBQs and annual flu vaccination program

Salary Range: AUD70,000 - AUD90,000

The Midfield Group is proud to be an Equal Opportunity Employer.

• The PNSY program involves testing individuals to determine if they meet PNSY work guidelines regarding visual acuity, depth perception, and color vision.
• When safety spectacles are required, the incumbent is responsible for fitting/ordering/dispensing prescription safety eyewear, parts and accessories.
• The incumbent functions as a para-optometric in the reception of patients, ancillary testing of these patients, and disposition for spectacle ordering, referral, or follow-up.
• Measures visual acuity, distance and near; amplitude of accommodation; and interpapillary distances: and instills ocular medications as needed.
• Performs confrontation visual field tests and tonometry and color vision testing.
• Technical/professional skill is required in the use of the following instrumentation: Topcon Retinal Camera; Humphrey Visual Field Analyzer; and other optometry instruments as required.
• Office management. The incumbent is required to establish and maintain appointment templates and to make appointments not filled by the TRICARE contractor.
• The incumbent is responsible for maintaining a numerical filing system to keep all civilian and military vision records current.

Starting at $49,838 Per Year (GS 6)

To provide a medicines optimisation services to the prison. To provide a medicines administration service to offenders at the medicines administration times as part of a 7 day per week rota. To undertake medicines reconciliation for prisoners admitted to the prison. To supervise assistants, when in the dispensary in providing dispensing services. To be an accredited checking technician providing final dispensing checks or medicines optimisation qualification. To ensure high standards of work in the dispensary, in clinics and for when out on the wings and to ensure all Standard Operating Procedures (SOPs) are read and adhered to. To assist the Senior Prisons Technician with writing, updating and monitoring the use of medicines optimisation SOPs. (Full JD can be downloaded in supporting documents section) IMPORTANT INFORMATION, PLEASE READ: All applicants must be willing to undertake National Security Vetting in order to work in a Prison Setting. This will be completed as part of the pre-employment checks through Oxleas and the prison vetting team. You will need to provide: Proof of right to work documentation Proof of ID, needs to include 1 photographicID Proof of address documentation Non-UK passport holders will need to have correct documentation (right to work in the UK) and a Home office Share code. Address History: 5 years address history will be needed. Applicants that are not UK Passport holders who provide less than 5 years UK address history will need to provide a Police Certificate which must be in English from where they resided previously. Applicants who are UK Passport holders who have lived abroad for a period of more than six months during the last three years will need to provide a certificate of good conduct or an overseas police check in English from the countries resided in or visited. In order to assist you in obtaining a Police Certificate, guidance can be sought from:https://www.gov.uk/government/publications/criminal-records-checks-for-overseas-applicants If the country you have resided in is not listed here, you can obtain the necessary information by contacting the relevant Embassy or High Commission for that Country. Their contact details can be found on the Foreign & Commonwealth Office website (http://www.fco.gov.uk/en).

To provide a medicines optimisation services to the prison. To provide a medicines administration service to offenders at the medicines administration times as part of a 7 day per week rota. To undertake medicines reconciliation for prisoners admitted to the prison. To supervise assistants, when in the dispensary in providing dispensing services. To be an accredited checking technician providing final dispensing checks or medicines optimisation qualification. To ensure high standards of work in the dispensary, in clinics and for when out on the wings and to ensure all Standard Operating Procedures (SOPs) are read and adhered to. To assist the Senior Prisons Technician with writing, updating and monitoring the use of medicines optimisation SOPs. (Full JD can be downloaded in supporting documents section) IMPORTANT INFORMATION, PLEASE READ: All applicants must be willing to undertake National Security Vetting in order to work in a Prison Setting. This will be completed as part of the pre-employment checks through Oxleas and the prison vetting team. You will need to provide: Proof of right to work documentation Proof of ID, needs to include 1 photographicID Proof of address documentation Non-UK passport holders will need to have correct documentation (right to work in the UK) and a Home office Share code. Address History: 5 years address history will be needed. Applicants that are not UK Passport holders who provide less than 5 years UK address history will need to provide a Police Certificate which must be in English from where they resided previously. Applicants who are UK Passport holders who have lived abroad for a period of more than six months during the last three years will need to provide a certificate of good conduct or an overseas police check in English from the countries resided in or visited. In order to assist you in obtaining a Police Certificate, guidance can be sought from:https://www.gov.uk/government/publications/criminal-records-checks-for-overseas-applicants If the country you have resided in is not listed here, you can obtain the necessary information by contacting the relevant Embassy or High Commission for that Country. Their contact details can be found on the Foreign & Commonwealth Office website (http://www.fco.gov.uk/en).

Are you ready to unlock your potential within a challenging, creative and fast paced work environment? Do you want to escape your current job role and work with people to build positive and productive lives, whatever their past? Now is the time to break into offender healthcare and develop your career.

Oxleas NHS trust were awarded the South West prison contract in 2022 and currently have a portfolio of 19 prisons across the South of England. We are currently looking to expand our pool of bank workers by recruitingPharmacy Techniciansto work within the Prison service on a flexible basis.

Our healthcare team have a real impact on promoting health and well-being to those in prison and we pride ourselves on using skills and strategies that instil hope for patients future resettlement back into the community. We directly deliver Mental Health, Physical Health, Pharmacy and Clinical Substance Misuse in an integrated healthcare delivery model to provide effective and responsive care to improve wellbeing and support better outcomes in the future.

As a Pharmacy Technician, you will be providing a medicines management service to patients within the prison with the professional support of a prison service pharmacist. You will administer medicines to patients against a valid prescription, ensuring this is taken correctly, provide advice to patients about the appropriate use of medicines and promote healthy lifestyles to aid their rehabilitation.

You will dispense prescriptions and stock items, whilst supervising assistants when in the dispensary. There will also be elements of stock control involved in your role, such as undertaking stock top-up services and reviewing expiry dates and storage facilities for all medicines, reporting any deficiencies to the prison service pharmacist.

Wondering what it’s like to work within offender healthcare?

“I really enjoy working in the Pharmacy Service for Oxleas, my role is extremely varied and I work within a very supportive team. I find my role rewarding as it is all about enabling patient’s rehabilitation and I enjoy interacting with patients daily and building relationships with them. Oxleas are a good employer and there are plenty of opportunities to be supported through qualifications and training which then allows you to progress through different bands within the team.” Amanda - Pharmacy Tech.

Oxleas – About Us

Oxleas offers a wide range of NHS healthcare services to people in community and secure environment settings. Our services include community health care such as district nursing and speech and language therapy, care for people with learning disabilities and mental health care such as psychiatry, nursing and therapies. Our multidisciplinary teams look after people of all ages and we work in close partnership with other parts of the NHS, local councils and the voluntary sector and through our new provider collaboratives. Our 4,300 members of staff work in many different settings including hospitals, clinics, prisons, secure hospitals, children’s centres, schools and people’s homes.



We have over 125 sites in a variety of locations in the South of England. In London we operate within the Boroughs of Bexley, Bromley Greenwich and into Kent. We manage hospital sites including Queen Mary’s Hospital, Sidcup and Memorial Hospital, Woolwich, as well as the Bracton Centre, our medium secure unit for people with mental health needs. We are the largest NHS provider of prison health services providing healthcare to prisons within Devon, Dorset, Bristol, Wiltshire and Gloucestershire, Kent and South London. We are proud of the care we provide and our people.

Our purpose is to improve lives by providing the best possible care to our patients and their families. This is strengthened by our new values:
• We’re Kind
• We’re Fair
• We Listen
• We Care


• To provide a medicines optimisation services to the prison.
• To provide a medicines administration service to offenders at the medicines administration times as part of a 7 day per week rota.
• To undertake medicines reconciliation for prisoners admitted to the prison.
• To supervise assistants, when in the dispensary in providing dispensing services.
• To be an accredited checking technician providing final dispensing checks or medicines optimisation qualification.
• To ensure high standards of work in the dispensary, in clinics and for when out on the wings and to ensure all Standard Operating Procedures (SOPs) are read and adhered to.
• To assist the Senior Prisons Technician with writing, updating and monitoring the use of medicines optimisation SOPs.

(Full JD can be downloaded in supporting documents section)

IMPORTANT INFORMATION, PLEASE READ:

All applicants must be willing to undertake National Security Vetting in order to work in a Prison Setting. This will be completed as part of the pre-employment checks through Oxleas and the prison vetting team.



You will need to provide:

Proof of right to work documentation

Proof of ID, needs to include 1 photographic ID

Proof of address documentation

Non-UK passport holders will need to have correct documentation (right to work in the UK) and a Home office Share code.



Address History:

5 years address history will be needed.

Applicants that are not UK Passport holders who provide less than 5 years UK address history will need to provide a Police Certificate which must be in English from where they resided previously.

Applicants who are UK Passport holders who have lived abroad for a period of more than six months during the last three years will need to provide a certificate of good conduct or an overseas police check in English from the countries resided in or visited.



In order to assist you in obtaining a Police Certificate, guidance can be sought from:https://www.gov.uk/government/publications/criminal-records-checks-for-overseas-applicants

If the country you have resided in is not listed here, you can obtain the necessary information by contacting the relevant Embassy or High Commission for that Country. Their contact details can be found on the Foreign & Commonwealth Office website (http://www.fco.gov.uk/en).


This advert closes on Monday 25 Nov 2024

Proud member of the Disability Confident employer scheme

Are you ready to unlock your potential within a challenging, creative and fast paced work environment? Do you want to escape your current job role and work with people to build positive and productive lives, whatever their past? Now is the time to break into offender healthcare and develop your career.

Oxleas NHS trust were awarded the South West prison contract in 2022 and currently have a portfolio of 19 prisons across the South of England. We are currently looking to expand our pool of bank workers by recruitingPharmacy Techniciansto work within the Prison service on a flexible basis.

Our healthcare team have a real impact on promoting health and well-being to those in prison and we pride ourselves on using skills and strategies that instil hope for patients future resettlement back into the community. We directly deliver Mental Health, Physical Health, Pharmacy and Clinical Substance Misuse in an integrated healthcare delivery model to provide effective and responsive care to improve wellbeing and support better outcomes in the future.

As a Pharmacy Technician, you will be providing a medicines management service to patients within the prison with the professional support of a prison service pharmacist. You will administer medicines to patients against a valid prescription, ensuring this is taken correctly, provide advice to patients about the appropriate use of medicines and promote healthy lifestyles to aid their rehabilitation.

You will dispense prescriptions and stock items, whilst supervising assistants when in the dispensary. There will also be elements of stock control involved in your role, such as undertaking stock top-up services and reviewing expiry dates and storage facilities for all medicines, reporting any deficiencies to the prison service pharmacist.

Wondering what it’s like to work within offender healthcare?

“I really enjoy working in the Pharmacy Service for Oxleas, my role is extremely varied and I work within a very supportive team. I find my role rewarding as it is all about enabling patient’s rehabilitation and I enjoy interacting with patients daily and building relationships with them. Oxleas are a good employer and there are plenty of opportunities to be supported through qualifications and training which then allows you to progress through different bands within the team.” Amanda - Pharmacy Tech.

Oxleas – About Us

Oxleas offers a wide range of NHS healthcare services to people in community and secure environment settings. Our services include community health care such as district nursing and speech and language therapy, care for people with learning disabilities and mental health care such as psychiatry, nursing and therapies. Our multidisciplinary teams look after people of all ages and we work in close partnership with other parts of the NHS, local councils and the voluntary sector and through our new provider collaboratives. Our 4,300 members of staff work in many different settings including hospitals, clinics, prisons, secure hospitals, children’s centres, schools and people’s homes.



We have over 125 sites in a variety of locations in the South of England. In London we operate within the Boroughs of Bexley, Bromley Greenwich and into Kent. We manage hospital sites including Queen Mary’s Hospital, Sidcup and Memorial Hospital, Woolwich, as well as the Bracton Centre, our medium secure unit for people with mental health needs. We are the largest NHS provider of prison health services providing healthcare to prisons within Devon, Dorset, Bristol, Wiltshire and Gloucestershire, Kent and South London. We are proud of the care we provide and our people.

Our purpose is to improve lives by providing the best possible care to our patients and their families. This is strengthened by our new values:
• We’re Kind
• We’re Fair
• We Listen
• We Care


• To provide a medicines optimisation services to the prison.
• To provide a medicines administration service to offenders at the medicines administration times as part of a 7 day per week rota.
• To undertake medicines reconciliation for prisoners admitted to the prison.
• To supervise assistants, when in the dispensary in providing dispensing services.
• To be an accredited checking technician providing final dispensing checks or medicines optimisation qualification.
• To ensure high standards of work in the dispensary, in clinics and for when out on the wings and to ensure all Standard Operating Procedures (SOPs) are read and adhered to.
• To assist the Senior Prisons Technician with writing, updating and monitoring the use of medicines optimisation SOPs.

(Full JD can be downloaded in supporting documents section)

IMPORTANT INFORMATION, PLEASE READ:

All applicants must be willing to undertake National Security Vetting in order to work in a Prison Setting. This will be completed as part of the pre-employment checks through Oxleas and the prison vetting team.



You will need to provide:

Proof of right to work documentation

Proof of ID, needs to include 1 photographic ID

Proof of address documentation

Non-UK passport holders will need to have correct documentation (right to work in the UK) and a Home office Share code.



Address History:

5 years address history will be needed.

Applicants that are not UK Passport holders who provide less than 5 years UK address history will need to provide a Police Certificate which must be in English from where they resided previously.

Applicants who are UK Passport holders who have lived abroad for a period of more than six months during the last three years will need to provide a certificate of good conduct or an overseas police check in English from the countries resided in or visited.



In order to assist you in obtaining a Police Certificate, guidance can be sought from:https://www.gov.uk/government/publications/criminal-records-checks-for-overseas-applicants

If the country you have resided in is not listed here, you can obtain the necessary information by contacting the relevant Embassy or High Commission for that Country. Their contact details can be found on the Foreign & Commonwealth Office website (http://www.fco.gov.uk/en).


This advert closes on Monday 25 Nov 2024

Proud member of the Disability Confident employer scheme

The incumbent plans weekly and monthly work scheduled for subordinate employees. Assists the Mechanical/Structural Foreman and Chief. Projects and Operations, and Chief Maintenance and Repair in planning work assignments and operation up to one year in advance. Takes measures to ensure that work flows smoothly in these units through planning and coordination with other Facilities Management sections and the Medical Center Services. Establishes deadlines and priorities on the basis of general work schedules, work methods, and policies established by higher levels of supervision. Determines the scheduling of assignments based on established priorities, and the amount of available required materials and equipment. Follow established step-by-step work procedures or recognized trade practice and makes minor deviations in procedures or methods to meet such temporary conditions as delayed delivery of materials, breakdown of equipment or unusual absence. Obtains clearance from Foreman before making any major changes of methods or work procedures. On request, furnishes recommendations to' the Foreman concerning work records and other qualifications of subordinate employees being considered for promotion and reassignment. Give tryouts where desirable. Incumbent performs duties and responsibilities relating to his trade when not performing lead duties.

Assigning Work - As directed by the Foreman, assign workers to the tasks needed. Workers will check with the leader on more difficult tasks and set the leader will set the pace for the journeymen. Adjust the work assignments in order to accommodate the leave schedule. Matters that require coordination with other organizations the Lead will report to the Foreman.

Evaluating Workers - As requested by the Foreman, the Lead will make informal appraisals of performance of individual workers and suggest ways in which the workers' performance can be improved.

Reviewing Work - The Leader will make progressive and final inspections of completed work for adherence to instructions, work orders and established trade practices. The Leader will be expected to be alert to possibilities for improving operations and reducing costs and to bring to the Foreman's attention any possibilities noted or suggested by subordinates.

Training - Leader will instruct new employees, conduct on the job training and work along with the journeyman demonstrating proper procedures and the amount of production expected.

Improved Methods - The Leader will make personal suggestions for improving work methods and achieving greater economy and provide information for the Foreman concerning specific work operations.

Applying Rules and Regulations - The Leader sets the example in performance of work and assures adherence in conduct, safety, fire, care of equipment and housekeeping rules and regulations.

General Personnel Management - The Leader will identify needs and recommend action to provide necessary employee services, keep workers busy, maintain discipline and refer leave requests and personnel problems to the Foreman.

General Administration - Leader completes and submits work order forms, documenting materials ordered/used and work performed, requisitions supplies, materials and tools, enforces safety rules and safe use of equipment and also posts time sheet as required.

Work Schedule: Tuesday-Saturday, 2:00pm to 10:30pm
Position Description Title/PD#: Maintenance Mechanic Leader/PD20870A
Critical Skills Incentive (CSI): Not approved
Relocation/Recruitment Incentives: Not authorized

Starting at $40.25 Per Hour (WL 10)

• Serve as a front-line uniformed representative of the NPS, providing current and accurate information and excellent customer service to visitors.
• Collect appropriate fees at a park entrance station, visitor center, campground. Operate various point of sale systems to conduct financial transactions.
• Initiate, modify, and improve work methods as well as automated systems and technologies.
• Trains, mentors and coaches employees and volunteers on fee program procedures and practices.
• Advise others on policies, procedures, and practices of a robust fee collection program.

AREA INFORMATION:
Acadia's main section of the park is located in Bar Harbor on Mount Desert Island and is 50 miles SE of Bangor. The Schoodic District of Acadia is located in Winter Harbor, is 65 miles SE of Bangor, and 50 miles from Acadia's main park's headquarters in Bar Harbor. The region offers almost unlimited recreational opportunities year-round; while the local communities offer schools, grocery stores, health care facilities, banks and small businesses.

Additional information at: www.nps.gov/acad/

Starting at $49,025 Per Year (GS 7)

Rhys Evans Farm Machinery are currently looking to recruit an experienced and qualified Mechanical Engineering Technician to join their team in Colac West VIC 3250.

The successful candidate will need to undertake and possess:

- Running and analysing diagnostic tests on a wide range of agricultural machinery/equipment and tractors (change to match what company does)
- Maintain, test and repair/replace mechanical assemblies on heavy plant/machinery and tractors (change to match what company does)
- Perform assessments and repairs in the field and workshop
- Perform preventative maintenance
- Fabricate and assemble new or modified mechanical components for products such as machinery, equipment and measuring instruments
- Work within timeframes and servicing schedules and maintain records
- Installing equipment and testing operations

Skills and Abilities:

- Ideally have Diploma in Mechanical Engineering or related
- A minimum of three years’ experience
- The ability to work in a team environment


Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Position available


Applications open 25th of October 2024 and closes on 25th November of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted