Total 121 Engineering job vacancies in Clacton-on-Sea, CO16 0BX

Healthy outcomes start with positive patient experiences.

Job Summary

• Supporting the Senior Management Team in the safe operation and maintenance of all plant, equipment and installations within the hospital estate, establishing efficient and effective compliance review procedures
• Primarily responsible for the electrical services operational equipment, decontamination, mechanical and building infrastructure. Control of contractors including permits to work on specialist and critical systems within the PFI hospitals as defined but not limited to those set out in HTM00 to HTM08 and any associated statutory and mandatory legislation

What you’ll do

• Fully competent (AP/CP Appointed) in the fault diagnosis, maintenance, repair assets to include but not limited to Mechanical systems such as LTHW Heating Systems, CHW Systems, Steam distribution systems, Hot Water Calorifiers, Refrigeration, Air Handling Units / Ventilation Systems, Compressed air and Medical Gas Systems
• Carry out Planned Maintenance of Mechanical Devices in line with current regulations and manufacturers recommendations
• Comparison and utilisation of technical documents as issued by the Department of Health
• Interpretation of technical terminology used in the Mechanical infrastructure
• The safe operation and maintenance of all plant and equipment within PFI Hospital site. Carrying out a range of repairs and new works to a high standard. Working on own initiative when applicable or as part of a team
• Supporting the Engineering Management team to ensure contractual response and rectification times are met. Producing required support documentation reports to meet contractual requirements.
• Undertaking Authorised Person and/or Competent Person responsibilities in relation to specified systems
• Ensuring services comply in accordance with the Project Agreement, legislative, statutory and HTM requirements
• Contributing to the commercial management of the operational element of the contract, including management of the Performing Monitoring systems and to ensure Contract and Commercial Compliance. Monitoring contractual response and rectification times to ensure compliance and avoidance of service failure and penalties
• Act when there are failures in compliance or initiatives and investigate the reasons behind these and address to build and develop performance
• The cost effective delivery of a Planned Preventative Maintenance Service
• The management of a reactive maintenance service during both normal operating hours and outside operating hours of the hospital. The working requirements will involve the need to take part in a roster out of hours call out system
• Provide technical and professional support to all staff, colleagues, engineering supervisors and to Trust officers in order to develop a team approach
• To represent Hard FM in applicable working groups for ensuring compliance with all relevant Health and Safety Legislation and site specific Health, Safety and Welfare policies
• Maintain formal and informal communication with Trust managers related to services activities / working group. Develop good working relationships with clinical and non-clinical staff at all levels
• Use of IT systems to include the CAFM and BMS systems to provide, monitor and report data within the Quality Assurance and other management reporting systems
• Delivery of service specific on the job training for employees within the Hard FM function
• Provide technical engineering advice and support for the maintenance of equipment, fabric and utility services for the PFI estate
• Ability to effect fault diagnosis on plant and equipment of a more complex nature
• Additional to the role summary the post will provide cover to other direct Labour force for Holidays and unplanned absence events. During these periods additional responsibilities are below
• The day to day commercial management of the estate maintenance and operation. Management and operation of the Permit to Work system and Safe Systems at work
• The management of a team who will ensure the safe operation of all plant and equipment on the hospital site in line with the Project Agreement
• Provision of advice to the engineering manager for engineering materials procurement
• Management of a Workshop operation and activities for M&E craftsmen
• Provision of guidance and advice to craftsmen in order to develop skills and improve effectiveness
• Ability to affect a hands-on approach when required
• Co-operating with the helpdesk team and ensure the return of completed worksheets in a timely fashion
• Ensuring a safe working environment and safe systems of work are followed

What you’ll bring

Essential

• Completion of C+G/Btec or equivalent in Mechanical Engineering, recognised Mechanical apprenticeship, time served
• Proven substantial experience within mechanical trade
• Confident capable engineer able to assess situations
• Self-motivated and able to adapt to changing priorities
• Skilled in the hands on repair of all plant and equipment, having the ability to fault find, read drawings, diagnose and repair using their technical knowledge on equipment
• Able to demonstrate an aptitude for problem solving using a logical approach
• Confident and logical under pressure but must understand urgency and respond accordingly
• Prepared to work on a call out rota
• Attend external and internal courses as required
• Good understanding of Health and Safety at Work regulations
• Report writing skills
• Must be computer literate preferably with knowledge of building management systems
• Must be able to demonstrate good verbal and written communication skills with good level of mathematical skills

Desirable

• Experience in Electrical Engineering Maintenance
• Previous experience in Health Service context
• Demonstrating maturity in working with multi-discipline trade groups
• Any specialist knowledge relevant to the health care environment
• Previous steam and/or refrigeration experience

Ready to be part of something greater? Apply today! Keep your career running smoothly.

Sodexo reserves the right to close this advertisement early if we are in receipt of a high volume of applications.

You bring the skills. We’ll bring the opportunities.

• 40.25 hours per week
• 07:00-19:00 x2 19:00-07:00 x2 then 4 off
• £17.05 per hour
• Based: ST4 6QG

​Check your local transport links here: Plan Your Journey | Traveline - the destination you should input isST4 6QG

About Sodexo

At Sodexo, our purpose is to create a better every day for everyone to build a better life for all. As the global leader in services that improve the Quality of Life, we operate in 55 countries, serving over 100 million consumers each day through our unique combination of On-Site Food and FM Services, Benefits & Rewards Services and Personal & Home Services.

We are committed to being an inclusive employer. We are a forces friendly employer. We welcome and encourage applications from people with a diverse variety of experiences, backgrounds, and identities. We encourage our employees to get involved with our Employee Networks such as Pride, Sodexo Parents & Carers, Sodexo Disability, Ability network, So Together, Generations and Origins.

We’re a Disability Confident Leader employer. We’re committed to changing attitudes towards disability, and making sure disabled people have the chance to fulfil their aspirations. We run a Disability Confident interview scheme for candidates with disabilities who meet the minimum selection criteria for the job.

Click here to read more about what we do to promote an inclusive culture.

A Leading facilities management company is recruiting for an Electrical Engineer to join them on a permanent basis.

This role will suit an aspiring Mobile Engineer that is looking to take the next step in their career with an award winning firm!

Our Client provides the latest FM technology, multi- industry experience and the skills of a dedicated workforce for the private and public sector customers.

Responsibilities:

• Lighting Lamp changes
• Emergency light testing
• PAT Testing
• Control Panel Maintenance
• Small Works - New sockets, new lights, new circuits

What do you need?

• Electrical Qualification
• NVQ level 3 in electrical installation
• 18th Edition (OR) 17th Edition

What you will get:

• Above market annual salary
• Bonus
• Company vehicle with personal use
• 25 Days Holiday + Bank Holidays

This is a key position, carrying out planned and reactive maintenance across several site locations.

You will be the first line in all service and maintenance throughout your allocated sites.

In return this proud firm will be investing in your career development.

Please get in touch with Randstad today to submit your application!

Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.

Candidates must be eligible to live and work in the UK.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

My client, an established leading manufacturer of components and assemblies for aerospace, petrochemical and general industrial markets, are currently looking to recruit an experienced Sales Estimator / Proposals Engineer to join their Commercial / Sales Team. We would also be interested in speaking to Graduates with 1-2 years experience and a relevent qualification in either Mechanical Engineering and/or Business.

Key Responsibilities:

• Receive and review Purchase Order Requisitions from Customers
• Prepare estimates from client's enquiry packages for review and pricing by the Proposals Manager.
• Review client specifications & Prepare quotations
• Liaise with manufacturing departments in the process of preparing bid documents
• Liaise between departments and suppliers
• Ensure you work safely throughout all activities in line with the company's safety standards and procedures
• Review and analyse client requests for proposals (RFPs) and specifications to determine project requirements
• Collaborate with engineering, sales, project management, and other internal teams to gather necessary information for proposal development
• Develop detailed and accurate technical and commercial proposals, including scope of work, cost estimates, schedules, and project plans
• Ensure compliance with company policies, client requirements, and industry standards in all proposals
• Prepare and present proposal documents and presentations to clients, as required
• Maintain up-to-date knowledge of industry trends, competitive landscape, and technical advancements
• Coordinate with subcontractors and suppliers to obtain necessary quotations and technical data
• Manage multiple proposal projects simultaneously, ensuring timely completion and submission

Candidate Requirements:

• Previous experience working in estimating and/or sales, ideally within an industrial engineering and/or manufacturing sector
• The ability to read and interpret engineering drawings
• Have a good understanding of Welds, Fabrication and Stainless Alloys
• Previous fabrication / welding experience would be highly desirable
• Strong organisation skills with the ability to communicate clearly and effectively across all levels of business, both internally and externally

My client, an established and leading manufacturer of components and assemblies for aerospace, petrochemical and general industrial markets, are currently looking to recruit a Senior Proposals Engineer to join their Commercial / Sales Team. We would also be interested in speaking to individuals with experience within an Engineering Purchasing environment looking to move into a more Sales / Proposals based environment.

Key Responsibilities:

• Prepare estimates from client's enquiry packages for review and pricing by the Proposals Manager.
• Review client specifications.
• Prepare quotations.
• Liaise with manufacturing departments in the process of preparing bid documents.
• Liaise between departments and suppliers.
• Prepare responses to post bid correspondence.
• Prepare documents for subsequent PO handover to Contracts Department.
• Review and analyse client requests for proposals (RFPs) and specifications to determine project requirements.
• Collaborate with engineering, sales, project management, and other internal teams to gather necessary information for proposal development.
• Develop detailed and accurate technical and commercial proposals, including scope of work, cost estimates, schedules, and project plans.
• Ensure compliance with company policies, client requirements, and industry standards in all proposals.
• Prepare and present proposal documents and presentations to clients, as required.
• Maintain up-to-date knowledge of industry trends, competitive landscape, and technical advancements.
• Coordinate with subcontractors and suppliers to obtain necessary quotations and technical data.
• Conduct risk assessments and develop mitigation strategies for proposal submissions.
• Manage multiple proposal projects simultaneously, ensuring timely completion and submission.
• Support post-submission activities, including client clarifications, negotiations, and contract finalisations.
• Review Proposals from Proposals Engineers to ensure it conforms with the requirements.
• Mentor and guide junior proposal engineers and other team members.
• Promote a collaborative and high-performance culture within the proposals team.

Candidate Requirements:

• Previous experience working in estimating and/or sales, ideally within an industrial engineering and/or manufacturing sector
• The ability to read and interpret engineering drawings
• Have a good understanding of Welds, Fabrication and Stainless Alloys
• Previous fabrication / welding experience would be highly desirable
• Strong organisation skills with the ability to communicate clearly and effectively across all levels of business, both internally and externally

Are you an experienced Fabric Engineer / Handyman looking for new opportunities and a chance to progress within a sector?

Our client is an established facilities maintenance company looking for a fabric engineer to join their team.

This is a static role working Monday to Friday, there is flexibility with starting times to fit around you.

What you will get :

• Salary up to £34000
• Flexible working hours
• 25+ 8 days' holidays
• Tools provided

What is required:

• Any Trade qualification ( Carpentry / Plumbing etc) Desired
• Legionella - L8 Desired
• Experience of handyman and maintenance

Day to Day Duties:

Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.

Candidates must be eligible to live and work in the UK.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Principal build contractor are looking for a Senior/Site Engineer for a QA/Checking role on the construction of a new build student accommodation project. Due to some of the nature of works involved it requires an engineer that has current/previous experience working on projects that include reinforced concrete frames/structures.

Reporting to the Senior Operations Manager your primary role will be the supervision for the groundworks/frame contractor ensuring that their setting out works are completed and correctly checked for the main building for a new student accommodation building which also includes a reinforced concrete basement, the provision of as built records, QA documentation as well as input with any planning and design issues. You will also be involved with site progress meetings providing input into the delivery of the project

CSCS Card will be a mandatory requirement as well as a proven track record doing a QA engineer role

Further details contact on 07713 201606 or chomer@fr-group.co.uk

Would you like to work Monday to Friday with an early finish right before the weekend? Do you have an engineering qualification together with some practical experience? Can you follow a process to test products or are keen to learn how, what, when and why? If so, this could be just the role for you!

Working 8am-4.30pm Monday to Thursday and 8am-3.30pm on Friday you will get all the tools and training to do your role, working with experienced members of the team to show you the ropes. You will learn about tolerance, calibration and legislation surrounding the products you are testing.

You will learn all there is to know about the products and link in with various departments along the way. There will be some heavy lifting required as part of the role however, there is lifting equipment to utilise

Communication will be quite key to this role as you will need to relay your findings and represent the business at certain times so you should be happy to do so!

Sounds good? Hit apply now!

This role would suit candidates who have worked as an Engineering Technician / Graduate Engineer / Engineering Assistant / NVQ Level 2 Engineering / NVQ Level 3 Engineering / City & Guilds Level 2 Engineering

Your new company

My client is an acoustic engineering company specialising in the design, supply and installation of noise control hardware. Making them unique, they have a contracting team that delivers noise solutions based on the pre-assessments done in-house. This presents great opportunities for people to develop in a desirable area of acoustics and work with clients on a broader scale.
They currently have 15 staff across acoustics, contacting, sales and admin, so you'll be a part of a close-knit company and a well connected team. The acoustics team is currently 4 strong with a lead and two juniors, so you'll be coming into the middle to support the lead and develop into a mor senior position down the line.

They conduct a range of environmental noise and architectural acoustics work for retail, high end residential, service stations, plants and much more...

Your new role

They are looking for an Acoustic Engineer / Consultant to join their team to support the growth of our business, based in Walton-On-Thames, Surrey. As a leading consultancy they design and install noise control equipment for the construction industry, predominantly in central London (80%), and in the home counties, but also throughout the UK.
The position involves being part of a team carrying out a varied and interesting range of work requiring a broad range of skills and knowledge of acoustics.

Position Overview:

• On-site survey work
• Data acquisition and analysis
• Noise modelling, calculation and report writing (CadnA)
• Project accounting and time management (Using in-house bespoke software currently in development)
• Client liaison and fee proposals
• Field work and site meetings

In addition, they offer the opportunity to get involved in noise control engineering, product design, development and testing.

What you'll need to succeed

• A working knowledge of either BS4142, BB93 or BS8233 assessments.
• Full UK driving licence.
• IOA Membership.
• Qualified to degree level in Acoustics, or another relevant discipline.
• Excellent IT Skills.
• Report writing skills.
• Survey skills.
• Able to work autonomously.
• Experience of noise control engineering would be desirable but not essential.

What you'll get in return

• Competitive salary: £30k - £35k DOE
• Pension scheme
• 28 days holiday (inc. bank holidays)
• Cycle to work scheme
• Training provided in house
• Support towards development with IOA etc.
• Hire cars provided - no need for your own vehicle.

What you need to do now
If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.
If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career.

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Hybrid Working with some paid on call (1 in 8 weeks)Working on a combination of BAU and new projects, you will be part of a team providing a responsive technical service. Responsible for the business critical server, storage area network (SAN) infrastructure and Cloud technologies and management of current systems, installing upgrades and new systems.

• Be a lead IT expert in regard to the support, build, configuration & deployment of business critical server, storage area network (SAN) & Cloud technologies
• Manage & resolve diverse & at most times complex technical issues
• To own & close out Business as Usual support tickets escalated from the service desk quickly & efficiently.
• To investigate infrastructure problems that have been escalated by second level support staff (Desktop Team) & after analysing the impact on users, take the necessary steps to ensure that all loss of IT services is resolved within as short a time span as possible.
• Be responsible for the security, optimisation, availability, storage, backup & retrieval & general safe keeping of electronic data in line with the IT Security Policy, the General Data Protection Regulations, Data Protection Act & the Freedom of Information Act.
• Manage the design, specification, installation & configuration of new server, storage, network security and Cloud technologies

The tech stack includes:

• MS Server 2012/16/22
• Active Directory
• DNS/DHCP
• Server Virtualisation - (VMware / Hyper V)
• SANs
• Exchange
• O365
• Azure / Cloud

**NO SPONSORSHIP AVAILABLE**

What you need to do now


If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.
If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Shift Engineer (Electrical Biased)

Stoke-On-Trent

£48,000

12hr Shifts - 2 Days / 2 Nights / 4 Off

Benefits:-

• Up to 10% Match Pension + Life Assurance X4
• 20 Shifts Holiday
• Discounts At Most Retailers, Qualifications, Medihealth Scheme

Our client is a leading food manufacturer, that values hard work, teamwork and developing people. They are part of a global group with multiple sites in the UK and are looking for an electrically biased shift engineer to join the team

Role & Responsibilities:

• Carry out planned preventative, predictive and breakdown maintenance of all high-speed production & packaging machinery
• Worked on control panels, HMi's, PLC's, SCADA Systems
• Electrical & mechanical fault finding, problem solving and repairs
• Continuous improvement projects
• Dealing with motors, servo drives, contactors, pneumatics, gearboxes, bearings, shafts, inverters
• Management of stores, ordering of spares & parts when needed
• Upkeep and alteration of electrical & mechanical drawings

Knowledge, Skills & Experience:

• Must be an electrically biased engineer
• NVQ Level 3 electrical engineering or maintenance minimum
• Ideally have worked in some form of fast-paced / FMCG manufacturing industry
• Must have completed a time-served-apprenticeship
• Strong electrical & mechanical problem solving skills
• Knowledge of PLC's, automation & control systems, HMi's beneficial
• Must be able to do fault finding in control panels
• Able to read and follow electrical schematic drawings
• Continuous improvement mentality
• Willingness to help in all areas of the team
• Worked on motors, inverters, VSD's, sensors, switches, pneumatics, gearboxes
• Ideally have worked with high-speed production & packaging machinery

"To apply please email your CV / resume to [ chrisg@hunterselection.co.uk ]". - Chris Gumm - 01908 010 438

If you are interested in this position please click 'apply'.

Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors.

Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.