Total 3 manufacturing production job vacancies in swindon sn5 7wz

Job Title: Production Operator

Location: Lydiard Fields, Swindon

Salary: £15.20 per hour

Office hours: 37.5 hours per week

Shift Pattern: alternating shifts, 6am - 2pm, 2pm - 10pm

Contract Length: 3 months - very likely to be extended

A multinational British speciality chemicals and sustainable tech company are looking for a Production Operator to join their leading plant in Swindon. Previous manufacturing experience is needed for this role.

Duties include:

• Co-ordinate and take responsibility for output of high quality product.
• Achieve the agreed production plan on time and in full.
• Adhere to site EHS standards and apply a Duty of Care at all times, both to yourself and your colleagues.
• Ensure all products are manufactured to agreed customer specifications.
• Contribute to the programme of continuous improvement and proactively work within the Production team and with other functions to provide ideas/suggestions for improving the operation, service and contribution made by the Production team to the profitable success of JM.
• Understand and adhere to JM Group PGM Control guidelines.
• To carry out/take on any other duties which are within the employee's skills and abilities whenever reasonably instructed.

Requirements:

• Manufacturing experience in light industry using semi-automated equipment.
• Good level of both written and verbal English, would be required to ensure a high quality of recording and following of procedures can be followed.
• Computer literate with particular emphasis on use of Excel spread sheets and accurate data entry.
• Health and Safety Conscious.
• Able to carry out manual tasks.

Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.

Job Title: Production Operator

Location: Lydiard Fields, Swindon

Salary: £14.45 per hour

Office hours: 37.5 hours per week

Shift Pattern: alternating shifts, 6am - 2pm, 2pm - 10pm

Contract Length: 3 months - very likely to be extended

A multinational British speciality chemicals and sustainable tech company are looking for a Production Operator to join their leading plant in Swindon. Previous manufacturing experience is needed for this role.

Duties include:

• Co-ordinate and take responsibility for output of high quality product.
• Achieve the agreed production plan on time and in full.
• Adhere to site EHS standards and apply a Duty of Care at all times, both to yourself and your colleagues.
• Ensure all products are manufactured to agreed customer specifications.
• Contribute to the programme of continuous improvement and proactively work within the Production team and with other functions to provide ideas/suggestions for improving the operation, service and contribution made by the Production team to the profitable success of JM.
• Understand and adhere to JM Group PGM Control guidelines.
• To carry out/take on any other duties which are within the employee's skills and abilities whenever reasonably instructed.

Requirements:

• Manufacturing experience in light industry using semi-automated equipment.
• Good level of both written and verbal English, would be required to ensure a high quality of recording and following of procedures can be followed.
• Computer literate with particular emphasis on use of Excel spread sheets and accurate data entry.
• Health and Safety Conscious.
• Able to carry out manual tasks.

Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.

Quality Control Manufacturing manager (hands on role)

£28-£32,000 one role available - 8.30-5pm occasionally work for home after your first three months of training based in swindon

Purpose of the role:

* You will be working on the largest retail account, handling quality issues that you cant always see, so viewing these from afar via teams etc might need to happen, you need to be organised and capable of managing many quality issues at once.

* You need to ensure you can read and interpret technical design packages and manufacturing details to allow full and accurate quality control inspection to be carried out, as at times You will be working in the warehouse putting together some fixtures (furniture, mannequins etc ) that have been created outside the country.

* Training is exceptional as you will be trained and supported by other internals currently working to support the accounts and the successful person will get to develop further within the company, so the potential is so great for progression.

* To ensure that all product ordered by the company is fit for purpose, consistent and meets both internal standards and specification, but also the expectations of our clients. This includes any legal and statutory regulation compliance.

* To develop and maintain current quality control standards and actively improve these.

* To act as the first point of contact for quality issues for the company supply and manufacturing base and actively improve the supplier and manufacturing standards without incurring any increase in product or material cost.

* Actively maintain and build supplier relations to increase product quality.

* To conduct quality control checks in line with the company standards for any product and/ or material required.

* To be a conduit between third-party QC agencies and Far East supply base to ensure a clear path of communication and resolution to all QC issues.

* To create quality control master document that identify critical areas of special interest in quality for each product within the range. To save and maintain these files in a timely and orderly manner.

* To monitor and advise on the performance of the quality control system and develop this accordingly.

* To liaise with any internal department to execute the quality control process. To actively maintain professional relationships at all times.

* Ensure that all product checks exercise full and detail quality control inspection covering all aspects of the quality control process. To accurately record these in the quality control format for future reference.

* To have key involvement with our supply and manufacturing base and attend manufacturing facilities when required to carry out quality control inspections.

* To carry out inspections within a timely fashion, without affecting prototyping or production time.

* To fully support the Design managers in the interest of quality control.

* To act as conduit for communication between supplier/ manufacturers and internal teams to determine product and material quality.

* To act as support for Equipment Development through quality standards.

* To manage product, material and any rectification logistics and processes for any product deemed as sub-standard or requiring further quality control inspection.

* To act as an advocate for quality control to both the internal and external customers, demonstrating cost, lean manufacturing and risk assessment benefits.

* QC process is to be documented from start to end and include proposals on the communication and resolution of issues with the relevant supplier.

Key Activities:

* Devising and furthering the established quality control procedures, standards and specifications.

* Reviewing technical specifications and client requirement and ensuring these are met in manufacturing production.

* Working closely with the design team and purchasing staff to establish quality requirements from suppliers and/ or manufacturers.

* Setting standards for quality as well as considering health and safety in all instances.

* Ensuring that manufacturing and production processes meet the required standards determined by the company and it's clients.

* Determining specific areas of improvement in both reducing product waste (material and time) and increasing manufacturing efficiency

* Define quality procedures around all product ranges and with internal departments (Sales, design and procurement).

* Establishing and maintaining controls and document procedures in the function of quality control

* Using relevant tools to establish and identify a clear and unbiased view of product and manufacturing quality.

* Advocate for cost benefits and consequences within communication that demonstrates to others the importance of risk assessment, prevention and corrective action.

*Maintaining an accurate quality control report system, documenting and recording all QC checks in both UK, Europe and Far East Supply.

* Provide and maintain a weekly tracking document for quality controlled product. This will detail what quality controls inspections have been carried out, a summary of the results, pass/ fail rates and details of the supplier/ manufacturer responsible. If a fail the value of the credit that is being requested and a breakdown of potential cost reimbursement. This will include all labour and transport costs incurred and also a charge for QC work undertaken that we will expect the split to pay. Where an item fails a credit must be received within 4 weeks of failure date.

Requirements:

* Degree educated or comparable qualification and/ or experience

* 5 GCSE grades A/B or O Levels, including English and Maths

* Extensive experience in retail equipment/ interiors or comparable industry

*Extensive familiarity with Microsoft packages

* Strong experience in quality control role/ inspections and quality reporting

* Ability to read and interpret technical design packages and manufacturing details to allow full and accurate quality control inspections to be carried out.

* Detailed understanding of manufacturing and finishing details.

Acorn by Synergie acts as an employment agency for permanent recruitment.

Proud member of the Disability Confident employer scheme