Total 27 maintenance repair job vacancies in portland or

The principal workload responsibility of this position is inspection, maintenance, repair, servicing, modification, adjustment, and calibration of the following electrical and mechanical systems associated with assigned aids to air navigation: (1)engine-driven standby power generation equipment, (2)electrical systems, (3)air-conditioning, heating, and ventilation systems, and (4) communications and control cables; and all other physical plant and structures workload such as: (1) antenna towers and poles, (2)buildings and structures, (3)roads and grounds, and (4) utilities (sewerage and water).

Typical duties include:

Working from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals to plan and lay out the routing, placement type, size, gauge, balance, load, continuity, and safe operation of electrical lines, circuits, systems, equipment and controls. Determines and places distribution panels, boxes, fittings, and connections and install wiring, couplings, conduit, relays, fixtures, transformers and other electrical devices including electrical service entrances.

Installing and repairing systems used to condition the air for different kinds of structures such as warehouses, ships, hangars, hospitals, submarines, and large office buildings and complexes, including those with areas that have special requirements such as communication centers, electronic data processing centers, operating rooms, laboratories, clean rooms, and other areas with sensitive equipment. Systems use a variety of methods of air conditioning such as mechanical compression, vapor compression, absorption, and steam jet or air cycle.

Sets up and operates a wide variety of wood working machines and tools. Assemble items with a variety of joining techniques such as miters, rabbets, dados, biscuit, and mortise and tenon, and use glues and adhesives to secure wood pieces, veneers, and counter tops. Use wood, metal and various composite materials when installing or repairing interior partitions, flooring, panels, suspended ceilings, counter tops, and moldings. Interprets drawings, blueprints, and specifications independently, and determines the layout and work sequences and types of lumber or special related materials. Plans and carries out projects from initial layout to completion. Responsible for accuracy, spacing, fit, and structural soundness and finished appearance, which are essential.

The supervisor checks overall work to see that it meets accepted standards and is completed in a timely manner. Incumbent may be required to do a moderate amount of travel.

The principal workload responsibility of this position is inspection, maintenance, repair, servicing, modification, adjustment, and calibration of the following electrical and mechanical systems associated with assigned aids to air navigation: (1)engine-driven standby power generation equipment, (2)electrical systems, (3)air-conditioning, heating, and ventilation systems, and (4) communications and control cables; and all other physical plant and structures workload such as: (1) antenna towers and poles, (2)buildings and structures, (3)roads and grounds, and (4) utilities (sewerage and water).

Typical duties include:

Working from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals to plan and lay out the routing, placement type, size, gauge, balance, load, continuity, and safe operation of electrical lines, circuits, systems, equipment and controls. Determines and places distribution panels, boxes, fittings, and connections and install wiring, couplings, conduit, relays, fixtures, transformers and other electrical devices including electrical service entrances.

Installing and repairing systems used to condition the air for different kinds of structures such as warehouses, ships, hangars, hospitals, submarines, and large office buildings and complexes, including those with areas that have special requirements such as communication centers, electronic data processing centers, operating rooms, laboratories, clean rooms, and other areas with sensitive equipment. Systems use a variety of methods of air conditioning such as mechanical compression, vapor compression, absorption, and steam jet or air cycle.

Sets up and operates a wide variety of wood working machines and tools. Assemble items with a variety of joining techniques such as miters, rabbets, dados, biscuit, and mortise and tenon, and use glues and adhesives to secure wood pieces, veneers, and counter tops. Use wood, metal and various composite materials when installing or repairing interior partitions, flooring, panels, suspended ceilings, counter tops, and moldings. Interprets drawings, blueprints, and specifications independently, and determines the layout and work sequences and types of lumber or special related materials. Plans and carries out projects from initial layout to completion. Responsible for accuracy, spacing, fit, and structural soundness and finished appearance, which are essential.

The supervisor checks overall work to see that it meets accepted standards and is completed in a timely manner. Incumbent may be required to do a moderate amount of travel.

The incumbent plans weekly and monthly work scheduled for subordinate employees. Assists the Mechanical/Structural Foreman and Chief. Projects and Operations, and Chief Maintenance and Repair in planning work assignments and operation up to one year in advance. Takes measures to ensure that work flows smoothly in these units through planning and coordination with other Facilities Management sections and the Medical Center Services. Establishes deadlines and priorities on the basis of general work schedules, work methods, and policies established by higher levels of supervision. Determines the scheduling of assignments based on established priorities, and the amount of available required materials and equipment. Follow established step-by-step work procedures or recognized trade practice and makes minor deviations in procedures or methods to meet such temporary conditions as delayed delivery of materials, breakdown of equipment or unusual absence. Obtains clearance from Foreman before making any major changes of methods or work procedures. On request, furnishes recommendations to' the Foreman concerning work records and other qualifications of subordinate employees being considered for promotion and reassignment. Give tryouts where desirable. Incumbent performs duties and responsibilities relating to his trade when not performing lead duties.

Assigning Work - As directed by the Foreman, assign workers to the tasks needed. Workers will check with the leader on more difficult tasks and set the leader will set the pace for the journeymen. Adjust the work assignments in order to accommodate the leave schedule. Matters that require coordination with other organizations the Lead will report to the Foreman.

Evaluating Workers - As requested by the Foreman, the Lead will make informal appraisals of performance of individual workers and suggest ways in which the workers' performance can be improved.

Reviewing Work - The Leader will make progressive and final inspections of completed work for adherence to instructions, work orders and established trade practices. The Leader will be expected to be alert to possibilities for improving operations and reducing costs and to bring to the Foreman's attention any possibilities noted or suggested by subordinates.

Training - Leader will instruct new employees, conduct on the job training and work along with the journeyman demonstrating proper procedures and the amount of production expected.

Improved Methods - The Leader will make personal suggestions for improving work methods and achieving greater economy and provide information for the Foreman concerning specific work operations.

Applying Rules and Regulations - The Leader sets the example in performance of work and assures adherence in conduct, safety, fire, care of equipment and housekeeping rules and regulations.

General Personnel Management - The Leader will identify needs and recommend action to provide necessary employee services, keep workers busy, maintain discipline and refer leave requests and personnel problems to the Foreman.

General Administration - Leader completes and submits work order forms, documenting materials ordered/used and work performed, requisitions supplies, materials and tools, enforces safety rules and safe use of equipment and also posts time sheet as required.

Work Schedule: Tuesday-Saturday, 2:00pm to 10:30pm
Position Description Title/PD#: Maintenance Mechanic Leader/PD20870A
Critical Skills Incentive (CSI): Not approved
Relocation/Recruitment Incentives: Not authorized