Total 38 qa engineer job vacancies in Bayan Lepas, Penang

1. Perform equipment safety buy-off and drive machinery safety program;
   • Ensure all MAE is safe (according to site requirement) before release to production
   • Ensure all MAE equipped with hazard assessment and environmental impact assessment before release to production
2. Participates in the review of Machinery design and serve as advisor on safe machinery concept
3. Conduct EHS inspection /assessment and provide technical support;
4. Plan and conduct EHS related training to employee, visitor and contractor;
5. Liaises with external sources (regulatory, contractor, supplier etc) to identify, document, and facilitate compliance with various legal and business EHS related requirements.
6. Serves as company’s registered Safety and Health Officer (SHO) and fully assume the roles and responsibilities of SHO as stipulated in the law.
7. Analyze data, conduct trend analysis, apply problem solving methodology and formulate recommendation to drive continual improvement of EHS management system performance;
8. Interact with all level of people to help develop or revise organization's documented procedures & WI's
9. Analyzes loss control and accident reports; develops, implements and maintains procedures to minimize losses and or accidents.
10. Performing audits of system, inspect to current specifications and conformance to the ISO Standard.
11. Co-lead for EHS committee

• Drive the end-to-end process of the project assigned from project confirmation up to project completion.
• Conduct engineering site survey for solar PV system installation.
• Coordinate with designer on the design of the solar PV system including but not limited to electrical, structural, and mechanical.

• Coordinate with construction engineer to ensure implementation of solar PV system installation.
• Plan and manage material purchase and subcontract via ERP system.
• Liaise closely with inter departments involved for the project completion.
• Liaise and manage sub-contractors/vendors for their scope of works, schedules and monitoring workmanship qualities or subcontractors during installation.
• Work with internal and/or external parties such as TNB, consulting firms, local authorities licensing matters and documentation.
• Liaise and coordinate with local authorities on meter installation and grid interconnection of solar PV system.

• Coordinate and conduct test & commissioning of the solar PV system.
• Weekly reporting and new project scheduling.
• To assist on the best practices and safe work procedure for every project.
• Organize a post mortem meeting for evaluation of project results, challenges faced and provide recommendations for future improvement.
• To contribute, comply and committed toward the company Quality, Health, Safety and Environmental Management System by making sure it is full compliances to International Standard, Legal compliances, local regulations, and any code of practice.

• Minimum 3-5 years of work experience in Electrical or Construction industry
• Possess a Bachelor Degree in Engineering majoring in Electrical
• Basic electrical knowledge is essential
• Proficient knowledge in MS Office (Word, Excel, Project)
• Proficiency in utilizing translation software (e.g. Google Translate, Google Lens)
• Posses own transportation and willing to travel when required
• Able to work under pressure and meet project deadline when required
• Self-motivated and positive attitude with strong sense of responsibility and result oriented
• Good interpersonal and communication skills
• Posses own transportation and willing to travel to sites
• Able to work under pressure and meet project deadline when required
• Self-motivated and positive attitude with strong sense of responsibility and result oriented
• Good interpersonal and communication skills

The lab's function is to provide analysis and test support to the operations team, assist with regular production monitoring, troubleshoot issues as they arise, and develop new testing methods to meet evolving process or technology requirement.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Conduct daily reliability test data analysis and reporting, including failure analysis (FA) for abnormal data
• Study and optimize test criteria based on product design
• Oversee machine/tooling buy-off, standardization, tool maintenance, and spare parts management.
• Tool optimization and new tool preparation to meet new product/technology requirements.
• Collaborate with the worldwide team to ensure consistent testing correlation
• Support other function teams for key projects.
• Manage Tool capacity
• Maintain proper documentation of work processes and procedures
• Communicate timely and effectively with relevant stakeholders
• Coach and guide technicians and operators

• Conduct site visit with follow up proposal and report to installation site and interconnection facilities.
• Possess sound knowledge in both DC & AC electrical system and IT networking with experience in design, install, troubleshoot and re-engineering.
• Prepare bill of material (BOM) for DC, LV, & MV electrical system and manage material purchase to ensure timely and adequate level of inventory until project completion.
• Provide general and technical support throughout the entire tender process.
• Initiate meeting with clients, consultants, authorities, management and cross departments from tender stage until project complete handover.
• Liaise and manage sub-contractors for their scope of works, schedules and monitoring workmanship qualities of subcontractors during installation.
• Record, implement and manage design change requirement through submittal.
• Work with internal and/or external parties such as consulting firms and authorities on licensing and permits matters and documentation.
• Liaise and coordinate with grid operator & authorities on interconnection of MV/HV electrical system to power grid.
• Experience with test & commissioning of the both DC & AC electrical system. Able to troubleshoot and rectify the problem during test & commissioning.
• Review project deliverables at every phase to ensure the project is within timeline and budget.
• Implement best practices and safe work procedure that comply to authorities rules and regulations throughout the project on site.
• Assist to organize a post mortem meeting for evaluation of project results, challenges faced and provide recommendations for future improvement.
• Well verse with technical letter writing, report, presentation, and method of statement documentation.
• To contribute, comply and committed toward the company Quality, Health, Safety and Environmental Management System by making sure it is full compliances to International Standard, Legal compliances, local regulations and any code of practice.

• Degree in Electrical Engineering.
• At least 1 year of experience in electrical industries such as electrical machinery maintenance, electrical product development, factory automation, M&E consultation, application engineering, or MV/HV equipment.
• Basic knowledge of electrical systems.
• Experience with AutoCAD.
• Experience in C&I solar projects is an advantage.
• Willingness to travel to job sites as needed.
• Must have a "car" for work-related travel and site visits.

• *Fresh graduates are encouraged to apply and kickstart their career with us!

Involved in technical and demo support for Omron products and also distributors and channel relationships and partnership collaborations across all levels, while also looking for opportunities to drive further business growth

Key responsibilities:

• Follow-up the latest development of product trend.
• Specialize and build expertise in the assigned product lines.
• Identify customer needs and propose best available product mix or value package.
• Contribute to or participate in product and application seminar with customer.
• Ability to judge the customer application based on the sample given.
• Understand market / customer demand / requirement on product and provide feedback to HQ.
• Develop and share products and technical knowledge which will help solve customer problems.
• Technically competent to support and back up Industry sales team for new applications involving Vision, Smart Sensor, Microscan, PLC, Motion, Sysmac and robot products.
• Conduct off-line and on-line product evaluation / demonstration at customer place.
• Provide system proposal to channel partners and customers.
• Submit weekly report for sample testing results and customer visits.
• To provide internal training (product knowledge sharing) to OMRON’s non-technical support staff, new recruits and channel partners.

• Designs and develops test cases to ensure coverage of internal and external customer expectations by analyzing and understanding system requirements and design specifications; applying standard test case development techniques.
• Reports tests coverage of the assigned test packages by continuously documenting test results during test execution.
• Design & execute test in manual and automated way to verify the product functionality based on requirement.
• Creates & setup the automation test environment consisting of both hardware and/or software by understanding the system configuration.
• Reports defects/failures with clear and concise description into Defect Management System (RTC or similar) by following standard defect description structure.
• Involves in defects resolution together with software developer by providing supporting information as well as retesting resolved bugs on every release.
• Work as individual contributor or technical leader to interface with internal or external customer on testing related topic.

1. To setup complex test systems/ test SW solution with new feature for product line based on PAV provided by MFI team accordingly to the following requirement:
   • Lead the project tester concept study with CoC, SE and ENG
   • To plan and design overall tester as per concept defined
   • To plan project tester budget and procurement activity
   • To track project budget and ensure equipment cost within the planned budget
   • On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
   • Release the test system according to Test system Release Procedure
   • To train and coach maintenance plan, analysis tool of breakdown causes, Test system setup guideline and test fixture and job design concept)
   • To lead standardization activity in functional area
2. To manage procurement plan with involvement of central purchasing, PIR partner and supplier. Maintain supplier performance evaluation and ensure supplier’s deliver according to technical specification.
3. Responsible on full test implementation according to test procedure according to PAV defined by CoC team and achieve defined test coverage, make sure alignment and calibration process (such as flashing if memory, tuner alignment/ Calibration) is in line with test procedure.
4. To guide and coach engineer in technical issue.
5. General support on the following:
   • To lead and drive in TFOR/ FPY meeting to monitor daily operation test related issue.
   • To coordinate change management in process/ test approach
   • To analyze MIS data and coordinate improvement activities on test time reduction and machine
     effiency.
   • Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling from new project set up team after SOP
   • To setup new tool to increase setup efficiency
6. Any other TEF7 related duties assigned to.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Provide mechanical simulations and solutions for edge-cutting flash memory products.
• Develop inhouse structural simulation automation platform based on commercial softwares (e.g. ANSYS, Abaqus).
• Predict and define structural risks and mechanisms using simulation tools for electronic packaging design, assembly and reliabilities.
• Material characterization for simulation accuracy and efficiency improvement  

BROAD FUNCTIONS:

• Ensure smooth process transfer from GO R&D to Penang
• Capacity Enterprise CE / HAMR program development in Penang
• Manufacturing Yield / Defects Improvement projects
• Product improvement iteration qualification

Regular

• Ensure timely translation of new HAMR product/process transfer from US R&D to Penang. Closely work with counterpart in R&D to develop new process / materials for performance improvements.
• Continuous Improvement of Sputter yields / productivity / high PPH for product maturity. Establish all necessary unique process controls for large volume builds based on the learning at NPI stage & HDD requirements.
• Conduct partition studies for troubleshooting root cause of high particle / low yield. Work together with the team members to take appropriate corrective actions for improvements including but not limited to implementing target sandblast criterias, process optimizations, working with target suppliers on quality improvements etc
• Work with Test yield team on Failure Analysis, understanding of various defect mechanisms of HAMR media and their relationship with sputter process / materials etc.
• Optimize sputter machine start-up & operation procedures to ensure process consistency & repeatability. Work with the team on machine start-up time reduction before media characterization activities in order to reduce downtime & improve productivity.
• Work together with Sputter Equipment team on hardware improvement projects for downtime reduction & yield improvements. Ex- sputter magpacks, different type of cathodes, disk holder designs etc.   

Irregular

• Support inter-department projects (Back End, TEST)
• Support HDD return failure analysis

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide post-production and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

BROAD  FUNCTIONS : 

• Coordinate on DET testing and publish results accordingly.
• Ensure all data are uploaded to OLSPC in timely manner
• Guzik tester capacity and resources planning.
• Data analysis
• Competitor analysis and FA.

RESPONSIBILITIES : 

Regular

• Work with Sputter Process and coordinate with technicians on DET testing activities and priorities.
• Monitor DET results closely and advise sputter process for tuning accordingly whenever necessary.
• Resources and tester capacity planning in supporting all DET testing activities.
• Involve in drive build and internal component data analysis and provide valuable opinion to improve internal product performance.
• Propose DET specification to Product & Sputter group based on process capabilities for specs revision during mass production.
• Supervise and coach a group of technicians to perform routine tasks.
• Support all DET testing for internal process evaluation.
• Understand and accept responsibility for performing jobs safely
• Follow safety and health rules and regulations
• DET lab 7S

Irregular

• Reference generation and head screening for new program.
• Failure analysis for magnetic related issue.
• Product to product comparison.

CONTACTS

Regular

• Sputter Process Engineering, R&D Sputter, PE and QA

 Irregular

• FA, Operation

Electronics
• Understanding of existing platforms, evaluate and select electronics platform for use in power tool applications from a wide variety of technical disciplines.
• Independently develop hardware specification document on the functional requirements of a product.
• Improve existing hardware design based on technical requirements.
• Develop/ improve technical solutions in cooperation with the project team members independently.
• Independently develop and maintain circuit design for different product.
• Independently create and maintain technical documentation.
• Independently perform functional test of test-unit.
• Independently validate and do essential improvements to the electronics to pass Bosch internal qualification.
• Independently prepare essential technical documents for electronics/ tool certification.
• Follow the project schedule according product development process.
• Support line and warranty teams for electronic device changes and updates.
• Ensure all documents are up-to-date based on engineering change (EC) requests.
• Apply all processes according to valid PT and Bosch procedures published in BGN.
• Apply a manufacturing mind set to designs in order to effectively and efficiently mass produce products while using expertise to elevate the entire team.
• Support and take over special tasks on section and department level as assigned by the superior.

Motor
• Independently assist / improve technical solutions in cooperation with the project team members.
• Independently assist/ improve with development of designs and processes to improve efficiencies, reduce costs, and improve quality according to project objectives.
• Collaboration of counterpart and provide cost estimates during in development projects.
• Understanding of existing motor platforms, evaluate and select motor platform for use in power tool applications from a wide variety of technical disciplines.
• Independently create and maintain technical documentation.
• Follow the project schedule according product development process.
• Support line and warranty teams for motor device changes and updates.
• Ensure all documents are up-to-date based on engineering change (EC) requests.
• Apply all processes according to valid PT and Bosch procedures published in BGN.
• Apply a manufacturing mind set to designs in order to effectively and efficiently mass produce products while using expertise to elevate the entire team.
• Support and take over special tasks on section and department level as assigned by the superior.

The position aims to play a crucial role in driving sales growth and ensuring effective sales operations within the organization by supporting and collaborates with other departments to achieve sales targets, maintain strong customer relationships, and contribute to the overall success of the company.

Business Development

• Participate in development of business, sales planning, and growth strategies and develop Sales Proposal with sales pipeline to meet budget

• Develop and maintain a pipeline of potential customers by attending networking activities, conduct marketing activities, customer meetings, proposal development and customer presentations to deliver outstanding customer value

• Maintain awareness of competitor information and participate in industry association in accordance with company policy

• Collaborate with internal teams (engineering, product management) to develop proposals and present solutions that meet client needs.

• Ensure business sustainability via balancing of sales, profitability and collection.

Relationship Management & Account Management

• Develop and manage relationships with key accounts in the industrial automation industry.

• Maintain a deep understanding of customer needs/issues and ensure their satisfaction with solutions provided.

• Regularly engage with clients to assess their requirements and identify upselling or cross-selling opportunities.

• Manage and coordinate with key vendors and partners to gain competitive advantage through creation and development of customer in selected vertical markets.

Sales support

• Collaborate and work closely with Application Engineers to ensure smooth project development & implementation which may include risk assessment and provision of technical solutions to meet customers’ needs

• Manage the sales process to ensure customer requirements are properly qualified prior to investment of resources

• Diploma/degree in Engineering discipline (Mechatronics/Electrical)

• Knowledgeable in Windows applications (Word, Excel, Power Point)

• At least 3-years’ experience in Sales function

• Strong knowledge of automation solutions and their applications

• Excellent Interpersonal and Communication skills

• Experience in distribution sales or a related field is a plus.

• Knowledge of the industry and market trends