Total 73,860 network engineer job vacancies in Malaysia

Job Responsibilities

• Understand the specific detailed information regarding hardware and software selection related to network and security such as switches, routers, SD Wan, Network Monitoring Systems (NMS), access points, firewalls, cyber security, Internet Access Management (IAM) and Web Application firewalls (WAF).
• Communicate with clients to perform system administration, installation, commissioning, troubleshooting, maintenance and field support for client platform-related problems.
• Provides guidance and expertise in the planning, design, and implementation of customer IT infrastructure for the most efficient solution to meet business needs development, including present and future capacity requirements.
• Provide specifications and detailed design drawings for the network architecture diagram.
• Respond to incidents, investigate and provide resolutions of incidents escalated via email, inbound call or onsite based on agreed service level.
• Learn and adapt to new technologies, products and platforms such as H3C, Cisco, Fortigate, Palo Alto, Aruba and Sangfor.
• Configure Access Switch, Access Point, IPTV and Fortinet firewall, and IPSEC VPN.
• Install access switch migration to stack switch and perform network preventive maintenance.
• Collaborate with the pre-sales team to perform demonstration as proof of concept for the related network products to clients.
• Fiber optics configuration and troubleshooting such as R&M, Commscope, Schneider, Avaya.

Job Requirements

• Possess a CISCO certificate such as CCNA or CCNP.
• Strong knowledge in the installation, setup, troubleshooting and RMA for Cisco, Aruba, Palo Alto, Fortigate, Sophos solutions including switches, routers, firewall, IP Phones, etc.
• Good attitude and communication skills.
• Minimum 1-2 years working experience.
• Candidate must possess at least a Diploma/Advanced/ Graduate Diploma, Bachelor's Degree/Post Graduate Diploma in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.

Perks & Benefits

• Annual bonus
• Flexible benefits up to RM1500 per year 
• Profit sharing on half-yearly basis
• Travel Allowance
• Company trip
• Professional development and growth opportunities
• Fitness membership
• Casual dress code

Job Responsibilities

• Understand the specific detailed information regarding hardware and software selection related to network and security such as switches, routers, SD Wan,
• Network Monitoring Systems (NMS), access points, firewalls, cyber security,
• Internet Access Management (IAM) and Web Application firewalls (WAF).
• Communicate with clients to perform system administration, installation, commissioning, troubleshooting, maintenance and field support for client platform-related problems.
• Provides guidance and expertise in the planning, design, and implementation of customer IT infrastructure for the most efficient solution to meet business needs development, including present and future capacity requirements.
• Provide specifications and detailed design drawings for the network architecture diagram.
• Respond to incidents, investigate and provide resolutions of incidents escalated via email, inbound call or onsite based on agreed service level.
• Learn and adapt to new technologies, products and platforms such as H3C, Cisco, Fortigate, Palo Alto, Aruba and Sangfor.
• Configure Access Switch, Access Point, IPTV and Fortinet firewall, and IPSEC VPN.
• Install access switch migration to stack switch and perform network preventive maintenance.
• Collaborate with the pre-sales team to perform demonstration as proof of concept for the related network products to clients.
• Fiber optics configuration and troubleshooting such as R&M, Commscope, Schneider, Avaya.

Job Requirements

• Possess a CISCO certificate such as CCNA or CCNP.
• Strong knowledge in the installation, setup, troubleshooting and RMA for Cisco, Aruba, Palo Alto, Fortigate, Sophos solutions including switches, routers, firewall, IP Phones, etc.
• Good attitude and communication skills.
• Minimum 1-2 years working experience.
• Candidate must possess at least a Diploma/Advanced/ Graduate Diploma,
• Bachelor's Degree/Post Graduate Diploma in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.

Perks & Benefits

• Annual bonus
• Flexible benefits up to RM1500 per year 
• Profit sharing on half-yearly basis
• Travel Allowance
• Company trip
• Professional development and growth opportunities
• Fitness membership
• Casual dress code

工作職責

• 了解交換器、路由器、SDWAN等與網路和安全相關的軟硬體選型的具體詳細信息
• 網路監控系統 (NMS)、存取點、防火牆、網路安全、
• 網際網路存取管理 (IAM) 和 Web 應用程式防火牆 (WAF)。
• 與客戶溝通，針對客戶平台相關問題進行系統管理、安裝、調試、故障排除、維護和現場支援。
• 在客戶 IT 基礎架構的規劃、設計和實施方面提供指導和專業知識，以獲得最有效的解決方案，以滿足業務需求開發，包括當前和未來的容量要求。
• 提供網路架構圖的規格書和詳細設計圖。
• 根據商定的服務水平，透過電子郵件、來電或現場回應事件、調查並提供升級的事件解決方案。
• 學習並適應新技術、產品和平台，例如 H3C、Cisco、Fortigate、Palo Alto、Aruba 和 Sangfor。
• 設定存取交換器、存取點、IPTV 和 Fortinet 防火牆以及 IPSEC VPN。
• 安裝接取交換器遷移至堆疊交換器並進行網路預防性維護。
• 與售前團隊合作，向客戶進行相關網路產品的演示，作為概念驗證。
• R&M、Commscope、Schneider、Avaya 等光纖配置和故障排除。

工作要求

• 擁有CCNA或CCNP等CISCO證書。
• 對 Cisco、Aruba、Palo Alto、Fortigate、Sophos 解決方案（包括交換器、路由器、防火牆、IP 電話等）的安裝、設定、故障排除和 RMA 擁有豐富的知識。
• 良好的態度和溝通能力。
• 至少1-2年工作經驗。
• 候選人必須至少擁有文憑/高級/研究生文憑，
• 工程（電腦/電信）、電腦科學/資訊科技或同等學歷的學士學位/研究生文憑。

津貼和福利

• 年度獎金
• 彈性福利高達每年 RM1500
• 每半年利潤分享
• 旅遊津貼
• 公司旅行
• 專業發展與成長機會
• 健身會員資格
• 休閒著裝要求

• Analysis and improvement of production improvement in the production department;
• Improve the production process and product performance, and formulate corresponding work instructions; Departmental lean production organization to promote work
• PCB board design review, process plan confirmation, development and verification
  Cause analysis, treatment and prevention of defective products such as internal and external inspections and customer complaints;
• Familiar with the process development process of electronic products, with innovation ability, communication ability, planning ability, analysis and judgment ability, improvement ability
• Familiar with relevant office software, and have a preliminary grasp of the use of PRO-E drawing software
• Familiar with production process control methods and quality analysis and control tools; proficient in process improvement tools;
• Familiar with SMT, plug-in, wave soldering, testing and other production processes, and know the process control points
• Familiar with the improvement and improvement of electronic product technology, tooling and fixtures, quick thinking, strong ability to analyze and deal with production process problems
• Have a strong ability to analyze and deal with production technical problems, be able to work independently, formulate standard operating specifications SOP, train and guide production line employees
• College degree or above, major in electronics, electrical, and communication, with more than one year of relevant experience
• Understand the management standards of process work series, program documents, and product quality, safety and environmental protection standards
• Able to work independently, write PFMEA, SOP, train and guide production line staff
• Possess strong communication, coordination and execution skills, a high degree of professionalism, a positive and optimistic work attitude, good at interacting with people of various personalities.
• Fresh graduated are welcome.

Perks & Benefits

• Open culture, company weekly sport days, teambuilding events, company events organization 
• Internal & External training for career path growth 
• Free employees parking with security

This position can apply to Automation & Granulation & Extrusion & Plastic Injection & Assembly Workshop.

该职位开放给自动化、造粒车间、挤出车间、注塑车间、装配车间的申请。

Responsibilities

• Arrange reasonable manufacturing planning according to production orders and complete manufacturing tasks on time.
• Coordinate with other engineers, suppliers, and assembly teams to ensure machines meet OEE targets.
• Establish technical manuals, drawings, models, training documentation, preventative maintenance plans, and troubleshooting guides for newly established automated equipment/processes.
• Work with automation suppliers for design reviews, research, installation, and troubleshooting of parts.
• Examine the manufacturing management in the workshop and the implementation of the manufacturing technical documents.
• Responsible for coordinating new product pilot manufacturing.
• Responsible for the maintenance of mold and fixtures in the area of responsibility
• Participate in the trial production, testing, and review of new products, materials, and molds.
• Ensure records are adequately maintained, updated, and traceable per ISO 13485 requirements.
   

Requirements

• Prefer Mechanical Engineering/ Polymer Engineering or another related field.
• Ability to work independently and under pressure, good team spirit, strong interpersonal skills, adaptability, and good communication and presentation skills.
• Candidates fluent in Mandarin are preferred as the role requires the candidate to deal with Mandarin-speaking colleague
• Fresh Graduates are encouraged to apply!
   

Perks & Benefits

• On-the-job training will be provided
• Medical Benefits
• Incentive Allowance
• Seniority Reward
• Year-end salary adjustment
• Year-End Bonus
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Free snacks / Happy hours
• Regular team activities
• Company trips
• Personal leave
• Open culture
• Personal development opportunities

ROLES AND RESPONSIBILITIES

• Develops project objectives by reviewing project proposals and plans; conferring with management. 
• Determines project responsibilities by identifying project phases and elements; 
  assigning personnel to phases and elements; reviewing bids from contractors. 
• Determines project specifications by studying product design, customer 
  requirements, and performance standards; completing technical studies; preparing cost estimates. 
• Confirms product performance by designing and conducting tests. 
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements. 
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems. 
• Controls project plan by reviewing design, specifications, and plan and schedule 
  changes; recommending actions. 
• Controls project costs by approving expenditures; administering contractor contracts. 
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions. 
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations. 
• Maintains project data base by writing computer programs; entering and backing up data. 
• Maintains product and company reputation by complying with federal and state 
  regulations. 
• Contributes to team effort by accomplishing related results as needed.

JOB REQUIREMENT 

• Requirements Analysis
• Design Skills
• Project Management
• Manufacturing Methods and Procedures
• Process Improvement
• Technical Understanding
• Documentation Skills
• Safety Management
• Supervision,
• Knowledge of CAD, CAD/CAM Circuit Design

Responsibilities:

• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Perform overall quality control of the work (budget, schedule, plans, personnel's performance) and report regularly on project status.
• Assign responsibilities and mentor project team.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Review engineering deliverables and initiate appropriate corrective actions.

Requirements

• Posses at least a Degree in Engineering or equivalent
• Have relevant working experience in shipbuilding industry is an
  advantage
• Knowledge in AutoCAD and Microsoft Project skill is an advantage 
• Qualified Entry Supervisor / AESP / Authorized Gas Tester is an advantage 
• Good time management and organization skills.

Responsibilities:

• To assist the Project Manager to monitor and supervise the construction works at the project site, to ensure it meets the requirements in term of cost, quality and time.
• To review construction drawings and carry out valued engineering.
• To co-ordinate with Authorities, Consultants and Sub-contractors.
• To prepare daily site reports and correspondence.
• To do site inspection to check on quality of works/progress of works/ defect inspection.
• To attend project site meeting to ensure project schedule is adhered to, problem and defects are attended to.

Requirements :

• Candidates must possess Degree/ Diploma in Building or Civil Engineering.
• Minimum 1-2 year working experience.
• Able to plan and lead sub-contractors on day-to day operation.
• Strong communication skills.
• Must be a team player, able to work hard and independently.

Perks & Benefits

• Commission and bonus
• Casual dress code

Responsibilities: 

• Able to work beyond normal working hours when necessary.
• Implement effective maintenance procedures to minimize production down time caused by breakdown of machineries. 
• Troubleshoot and diagnose problems and develop and execute maintenance plans to minimise downtime and disruptions. 
• Analyse data to identify trends, diagnose problems and develop solutions to improve equipment reliability and performance. 
• Implement effective preventive maintenance plan to ensure all facilities and equipment operate efficiently and effectively. 
• Initiate necessary modification and improvement to enhance machine efficiency. 
• Conduct studies and carry out analysis to ensure capacity of mechanical installations meet the needs of production. 
• Initiate immediate actions to recommend for improvement and upgrading when and where necessary. 
• Ensure all work requests are sufficiently and promptly fulfilled. 
• Assist in developing system and procedures to continuously enhance energy efficiency. 
• Conduct constant review on spare parts consumption and initiate necessary purchase of spare parts. 
• Analyse spare parts consumption and maintenance cost and initiate effective actions to reduce consumption and maintenance cost. 
• Monitor to ensure operation of utility supply and facilities comply with provision of relevant laws, by-laws, rules and regulations. 
• Plan constantly for proper upkeep and maintenance of building facilities. 
• Ensure continuous development and upgrading of subordinates’ skills. 
• Involve actively in cost savings or improvement projects. 
• To advise and guide maintenance supervisor in the implementation of effective 
  maintenance programs. 
• Provide proper guidance to subordinates to troubleshoot and overcome machine problems speedily and effectively. 
• To prepare monthly reports, capital expenditures and evaluate service providers.

Qualifications: 

• Minimum 3 years of relevant work experience in same field mechanical, electrical or industrial maintenance 
• Strong understanding of engineering principles and knowledge of equipment and machinery 
• Ability to analyse information, diagnose problems and develop solutions 
• Excellent communication and interpersonal skills 
• Strong time management and organisational skills 
• Ability to prioritise tasks and make decisions under pressure 
• Language required : English,Bahasa Malaysia, chinese 
• Minimum education level : certification level 

ROLE AND RESPONSIBILITIES

• Technically advise suitable products, service or equipment for Client. 
• Secure and Renew Orders and Coordinate for the delivery. 
• Meeting with Clients onsite to propose irrigation solution for the site. 
• To Coordinate with Marketing team to produce the necessary sales kits (i.e. technical presentation, sales brochure, advertisement and etc.) 
• Assists with research and development of new product and services 
• Prepare detail bill of material and quotation for all enquiry, including surveying with drone & producing contour map for potential customer. 
• Provide preliminary design conceptual drawing for presentation and quotation. 
• In charge for the operation of e-commerce 
• In charge for providing tutorial or training program for Client (i.e. Landscape Architect, M&E Consultant,Developers and etc.) 

JOB REQUIREMENTS 

• Minimum SPM/ Professional Certificate/ Diploma/ Degree or equivalent in related field. 
• At least 3 year(s) of working experience in related field is required for this position.
• Ability to converse fluently in Mandarin & English
• Excellent in Microsoft Office (Excel, Word, Power Point) 
• Excellent in AutoCAD 2D 

Jobs Scope:

• Designing, implementing, and managing Windows server environments for various projects.
• Evaluating, recommending, and implementing cloud solutions to meet project requirements.
• Developing and maintaining backup systems to ensure data integrity and disaster recovery capabilities.
• Implementing virtualization technologies such as VMware or Hyper-V to optimize server resources and enhance scalability.
• Designing and deploying storage solutions to meet the storage needs of various projects, including SAN, NAS, and RAID configurations.
• Collaborating with cross-functional teams to implement hardware upgrades and ensure seamless integration with existing systems.

Requirement:

• Bachelor's degree in Computer Science, Information Technology, or related field.
• Strong interest in system engineering and willingness to learn new technologies.
• Experience or familiarity with virtualization technologies such as VMware or Hyper-V is a plus.
• Effective problem-solving skills and the ability to work efficiently in fast-paced environments.
• Excellent communication skills and the ability to collaborate with cross-functional teams.

Perks & Benefits

• Commission and bonus
• Travelling Allowance (travel stipends, transportation, etc.)
• Flexible working hours
• Casual dress code
• Regular team activities
• Company trips
• Annual Leave / Medical Leave
• Medical Claim
• Optical & Dental claim
• Fast growing company that ensure career growth.

REQUIREMENTS

• ABILITY ON MATERIAL ORGANIZATION
• ABILITY TO SUPERVISE AND MANAGE SITE WORKER & SITE ISSUE
• PROFICIENCY IN COMPUTER - AIDED DRAFTING (CAD) SOFTWARE
• ABILITY TO DEAL WITH DIFFERENT PERSONALITIES AND REMAIN CALM
• ABILITY TO CARRY OUT ELECTRICAL DESIGN ACCORDING TO INDUSTRY STANDARDS
• WILLING TO TRAVEL

PERKS & BENEFITS

• KWSP, SOCSO & EIS IS PROVIDED
• TRAVELLING ALLOWANCE

This is a full-time role for a Sales Support Engineer, stationed in Kuala Lumpur, responsible for providing sales and technical support to customers, as well as preparing and delivering technical presentations. To  identify new opportunities of sales and marketing activities .Technical back groud with semiconductor knowledges preferred .

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Central location
• Casual dress code
• Personal leave

Responsibilities:

• Installs, maintain and repairs Automatic Identication Data Capture equipment,  such as Thermal Transfer Printer(Deskotp, Table-top, Mobile), Handheld Scanner, Mobile Scanner/Terminal, and other related products onsite or offsite.
• Study blueprints, schematics, operator & service manuals, and other specifications to familiarise installation & servicing procedures.
• Setup or oversee installation of equipment according to manufacturer's specifications.
• Operates & demonstrate equipments to End Users
• Perform End User Training upon equipment installations
• Deal with Customers (End User or Engineer) when service or support is required
• Consult with engineering personnel to resolve unusual problems in system operation and maintenance.

Requirements:

• Possess at least DiplomElectronics or equivalent field.
• a Engineering, Those without Diploma but have relevant work experience is encouraged to apply
• Fresh Graduates are encouraged to apply as we provide On-the-Job Training
• Proven work experience as field service technician (if any)
• Basic knowledge on equipment control and troubleshooting methods/skills.
• Excellent analytical and problem solving skills.
• Customer oriented and effective communication skills.
• any related work experience with Thermal Printer or Scanner such as Sato, Zebra, Honeywell, OKI, Epson, Citizen, etc is added advantage

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Car Allowance
• Full Petrol, Toll & Parking Claims
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Open culture
• Personal development opportunities
• Yearly Bonus & Incentives
• Yearly Salary Review

Requirements : 

• Bachelor's degree in engineering or related field.
• Valid engineering license - CIDB or NIOSH.
• 2 years field and project planning experience.
• Proficiency in design and visualization software and excellent computer literacy.
• Ability to work with multiple discipline projects.
• Strong project management and leadership skills.
• Strong written and verbal communication skills.
• Knowledge of applicable codes, policies, standards, and best practises.
• Must posses own transport and be willing to travel. 

Job Responsibilities : 

• Prepare, schedule, coordinate, and monitor assigned engineering projects.
• Assign responsibilities and formulate project paramaters to the project team.
• Interact with clients to interpret their needs and requirements and represent them in the field .
• Perform quality control tasks and report on project status.
• Cooperate and communicate with project participants to maintain profitability and efficiency.
• Develope equipment specifications.
• Ensure compliance with applicable codes, practises, policies, standards, and specifications.
• Generate Gantt Chart, S-Curve, and Project Pipeline Schedule.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel, sports, transportation, etc.)
• Company trips
• Medical insurance
• Personal development opportunities